How to connect a modem to an android tablet: step by step instructions

Some tablet models are not equipped with a special SIM card slot. Therefore, they cannot carry out the function of accessing the Internet, which is so necessary in modern living conditions. In this case, users are faced with the question of various ways to solve this problem.
Of course, it remains possible to connect via a wireless Wi-Fi network for free access. But in this case, you will have to constantly look for a synchronization point or purchase a router home. All this is very inconvenient, since access to the network will be limited. In this case, you can use a modem.

We will tell you how to connect a modem to an Android-based tablet.

How to connect

Thanks to this method, you can provide free Internet access on your device. But before you start using it, you must install it correctly. For convenience, use a step-by-step connection plan.

• Get a 3G modem with the ability to use the built-in SIM card.
instagram viewer
• If you have a special USB input, you can directly connect it to your tablet.
• If the connectors do not match the wires, you canpurchase a special adapter for modern device models.
• After that, the program should write a notification that a new device has been detected.

IMPORTANT! If, when using the adapter, the technician does not recognize the connected module, most likely you have an outdated model that does not support this method of pairing equipment. If possible, buy a new version of the tablet in the store.

How to make the necessary settings

After the equipment is connected correctly, it is necessary to configure it correctly. This will allow you to use all the possibilities of technology.

To configure, you will need to follow these steps in the order shown.

• For the tablet to recognize the device, you must install the program 3G Modem Mode Switcher.

IMPORTANT! There are other utilities for settings. If you decide to choose such a program, download it only from verified official sources.

• Do it all installation wizard prompts in the dialog box that opens.
• After properly downloading and installing the application on your tablet Log in to it.
• Then select the value of interest for the operating mode of the device. In this case, you need to set the parameter “only modem”.