The scanner does not scan what to do: why the matrix does not start from the scanner, instructions on how to solve the problem

Despite the variety of the device, malfunctions can occur for everyone over time. However, it is necessary to know not only the causes of the problem, but also the ways to solve them. Thus, in this article we will consider a situation in which the scanner ceases to function fully, and we will also analyze the algorithm of actions for its resolution.

Main mistakes

There are many incorrect actions when interacting with equipment. They can one way or another lead to serious damage. So, below are the most common manipulations that users perform:

• Most people rely on the automatic settings of the unit, however, this is not advisable. Pronounced effects may occur when cropping an image. Some models may fail due to a lack of understanding of the picture parameters.
• In addition, guides may not be adjusted for documents. Therefore, the unit does not find the object. The mentioned category of errors may also include the position of the position across, or the indicators are set completely different.
  instagram viewer
• Do not forget that the resolution makes sense to set accordingly.
• You can often notice that the owner is loading too much material into one process. Most likely, this will lead to a cancellation in the feed.
• It is important to pay attention to the shade of the submitted document. If it is really bright, the scanner may not recognize paper.

Why the matrix does not start from the scanner

You can also highlight a huge number of reasons why this or that situation arises. In order to surely make out all the possible options, it is recommended to pay attention to the following aspects:

• The most common case is providing an error at the start of work. This can be explained by the fact that initially an unreliable source was directly selected in a special program for the scanner.
• In addition, it was possible to establish a very low quality. Most often, to prevent problems, download the application to a personal computer.
• In connection with the long-term operation of the device, a significant amount of dust can accumulate, which directly affects the performance of the structure.

ATTENTION! Small particles of debris can be located not only on the site, but also directly inside the glass strips.

• The user often indicates invalid settings. For example, for paper size A5, parameters for A4 size were presented.
• It is also possible situation with the activation of the function, which is responsible for the independent elimination of the tilt.
• Do not overlook the adjustment of the width of the document. If the location is incorrect, a failure may occur.
• It is important to look for foreign objects during the implementation of the functional. They are also able to interfere with activities.
• It is possible that the output object is just not suitable for the procedure in the equipment used.
• If you used the unit for a long time, then the temperature inside can increase markedly, which in the future will negatively affect the engine. Thus, most likely, the device went into mode to save energy.
• It is advisable to double-check, maybe you clicked on the tool under the name "skip a blank page".

Instructions on how to solve the problem if the scanner does not scan

Of course, for each case there is a certain solution to the problem. Therefore, in case of malfunctions, it is recommended that you follow the steps below:

• First of all, it is advisable to reboot all the structures that participate in the activity. This is done by disconnecting them from the main power.
• Further, it is important to close all available programs on the PC and also play the reboot.
• Then you can stick the cable into the appropriate connector and start.
• At the end, you need to double-check the performance.

IMPORTANT! Pre-wipe with a soft cloth the entire structure from the possible presence of dust.

If you are left without a positive result, you will have to prefer a slightly different outcome of events:

• It is worth checking the wires. To do this, connect it to other holes. If the work is unchanged, then you can connect another usb port to the scanner. Thus you check the functionality of the product.

It is important to note the problems in the software.

• To do this, disconnect the invention for scanning from the PC.
• Then find and run the “programs and components” section on the computer.
• After that, you need to find a special utility for the printer. It must be removed. The instructions that will be provided from the very beginning of the process will certainly help you with this.
• Now it will be necessary to activate it again and restart the device in operation.