Laptop takes a long time to load: causes, troubleshooting

Each device tends to fail or reduce performance over time. However, this does not mean that the equipment is no longer usable. In most cases, you can identify the source of the problem and eliminate it. Consequently, the written article will discuss possible malfunctions.

The laptop takes a long time to load and slow down

In the modern world, this technique is in special demand. And when a particular problem arises, it is advisable to resolve the issue of its elimination immediately. So, there may be several possible reasons. Often dust accumulates, viruses appear in the system, automatic loading is overloaded, fragmentation of the hard disk increases, and so on. Below we will try to parse the most common defects.

Why does the laptop boot slowly and what to do?

All reasons can be divided into two broad categories: hardware, which are associated with hardware and software. Accordingly, the latter represent negative aspects in software.

Overheat

If you notice that the bottom surface of the case began to heat up very much, and the noise from the fan increases, then this case is complicated. The fact is that when a critical temperature point is reached, the system automatically activates, which is responsible for protection against overheating. Therefore, it is necessary to disconnect the equipment from the power supply, then disassemble it and clean it from small particles, dust.

Virus attack

Indeed, there is a certain type of virus that may not manifest itself for a long time, but slow down the performance of the laptop. It is recommended that you pay attention to antivirus programs. To start it, you must perform the following steps:

• To begin, open the main window and go to the "scan hard drives" section.
• Now you can select the “deep scan” and click on the devices that you want to test.
• In the process, the platform will independently detect files that are in doubt. Depending on your desire, you can delete it, skip it, clean it, and move it to quarantine.

Attention! If the above manipulations did not help, then you have to fix the file yourself.

Overloaded startup

It makes sense to periodically clear the windows boot, thereby removing unnecessary programs. To do this, you will directly need the combination: "Ctrl + Shift + Esc." After that, the tab should open, in it you need to click on "startup". There you should leave only those that are important to you.

Not enough system disk space

Information that is in it, with time, can be fragmented. That is, some sections should be ordered and sorted. But first it makes sense to carry out a check using the following steps:

• First you need to go to “my computer”. Then right-click on the disk, and then on the line “properties”.
• Then open the “service” tab and point to “optimize”.
• In the tab that will be available, you will see a list of media. Accordingly, you have to click on “analyze”. As a result, a result will be issued. If a percentage greater than 10 is noted, then defragmentation should be carried out. This will be discussed at the end of the article.

Cluttered registry

Slow loading provokes a large number of available programs. The solution will help specialized utilities. For example, it is advisable to download WinHacker 95. She is able to change icons and remove utility folders. And Registry Search, in turn, can change indicators in the registry, while the work will be carried out both from the local PC and from the remote.

Not enough RAM

Of course, after a certain period of time, the memory becomes saturated to the impossible, which is why problems arise. There is a pattern: the more programs are installed and running at the same time, the more likely the formation of malfunctions and failures. Thus, it is recommended to regularly use resources that comprehensively serve the registry. The most trusted category includes Reg Organizer. It is he who compresses and cleans the OS. In addition, with its help it is possible to reproduce the complete removal of the software.

Checking and defragmenting a disk

This utility checks the properties, finds out if there are errors in the system or not. Also, if there are bad areas, then she will be able to restore or fix them.

• Preliminarily, you should transfer to the “service” through the properties and perform a check.
• To carry out the main process, a specialized program will be required. To do this, open “start” and enter “disk defragmenter”.
• After that, in the “current state” tab, it is important to select the necessary component.
• In conclusion, it remains to click on "defragmentation" and wait a while.

Reference! It may be that you will need a password and confirmation. To achieve the result, it is still worth agreeing and providing the code. So, periodically it is necessary to implement the described plan.

It is better to avoid this procedure with respect to SSDs and various memory cards.