Surely every home there old headphones that are either broken or simply bored or have been replaced by newer, high-quality model. Do not rush to throw them away - from such material can make a huge amount of other useful gizmos. It can be as a gift to someone from the family, or just simple hack for yourself or for interior decoration.
What can be done from the old headphones? Whether it will be too difficult for someone who had never engaged in the manufacture of any homemade stuff? All this you will learn in this article.
What to do with broken headphones
The content of the article
- What to do with broken headphones
-
Options that can be made of old headphones
- loudspeakers
- Microphone
- A bracelet
- Chalker
- Plug the headphone jack
- magnets
Instead of throwing the device, you can first try to repair it. It will have to determine the cause of the damage - they can be quite a lot. After that you can easily find a solution to the problem on the Internet, and if your skills will be enough to repair, will be able to return them to normal operation.
But if the headset is already nothing will help or you just bought a new, not wanting to bother with repairs, the it makes sense to learn a few interesting ideas, implementation of which need quite a bit of time and efforts. The result is a completely new and original thing.
For the production of such crafts usually do not require special skills or experience, as well as a large amount of additional material, so the task of even a beginner can handle it.
If you are interested in this rewarding reincarnation, a closer look at the most popular craft ideas from the old headphones.
Options that can be made of old headphones
Options are extremely different from each other - that any device similar profile, such as a microphone or speakers, as well as chokers or magnets that you can give to friends and acquaintances.
loudspeakers
One of the most useful tools that you can do yourself, are speakers. Make them quite simple, and the result is a good speaker system, it is suitable for home use. You'll need some additional materials: thick paper cup, preferably made of cardboard, the accessory itself, scotch tape and electrical tape.
The bottom of the cup should be carefully make a hole to get a small hole, just repeats the size of one of the speakers. Then paste the earphone, secure it with adhesive tape and electrical tape.
Homemade speakers are ready!
Microphone
The headset can be a boon for those who urgently need to call on Skype or use a microphone for other purposes, and it is not at hand or it broke.
Undoubtedly, it will be somewhat inferior in quality to the original microphone, and to use such a device is not recommended on a regular basis. But in some situations, this is a great option. Need tape or electrical tape, via which the microphone from the old headphone required to fix the web camera.
IMPORTANT! Such a device can be made more complicated way, but in this case need to solder, increasing the number of tools and time. But the microphone can be used for quite some time.
A bracelet
From the old accessory can be done other than women's jewelry. You will need to disconnect the wires from the speaker and the plug, and then separate them until the end. Then fasten the resulting provodochki on any surface with adhesive tape and engage you in any known weave. On the Internet you can find a large number of master classes to illustrate the various techniques of craftsmanship.
Then remove the tape, and wire ends are connected to the soldering iron. Bracelet out very original and beautiful.
Chalker
In a similar way can be woven choker - only in this case you may need more wires. This method is suitable for those who have several pairs of headphones, which are similar to each other.
Be careful when connecting the remaining ends - if it is not enough to fix firmly, the product can untwist after the first use. Also watch out for the length of the tips - if not cut, sharp wire will scratch the skin.
Plug the headphone jack
Useful thing would be, and a cap. It is necessary to protect the connector from any effects of the environment - for example, any contamination or mechanical damage. You will need to cut off the plug from the wires and speakers.
Then insert it into the slot in the same way as we did before, and leave. This self-made plug will allow you to not worry about the safety of the phone even during rain or heavy snow.
magnets
The last method would be the retrieval of magnets spoiled device. It is very easy, you do not even need any other available means.
Magnets can be used for a variety of purposes - to search for clips or other small metal gizmos or as part of any other device manufactured independently.
Now that you know what you can do of the most common of old headphones, which have long been lying around at home doing nothing. Rather than throw out unnecessary things, because it is possible to derive maximum benefit even after breakage.
As always "interesting and poznovatelno". But the authors of the idea would be to check everything.
Example: "Plug the headphone connector" - if you insert a plug into the socket, it is usually
internal speaker is turned off !!
I'm not lazy, I took Xiaomi-5s phone and inserted into the socket cable with 3.5mm jacks at the ends,
I turn on the player on the phone and put in phone jack - sound is gone !!
And so thank you!
Just need to not only cut wire, but also to cut the tip of the connector
That chudnenko, that only those who have followed the idea without reading the comments, will probably be disappointed with the result. Therefore, the first sentence (first comment) remains in force.