The mouse does not respond well to movement on the table: what to do

Computer equipment, like other equipment, requires a responsible approach. Proper maintenance of the equipment not only improves the comfort of work, but also significantly extends the life of products, and protects them from various breakdowns: both technical and mechanical. It would seem that even one of the simplest computer elements - the mouse, requires special attention from the user. To a large extent, it depends on its owner how effectively it will work.

If the mouse reacts poorly to movement on the table

Despite the technical complexity of computer components, it is the mouse most often the first to fail. This happens because of the banal wear, that is, when the user does not change it for a long time, or simply watches it poorly. This is the main reason why the mouse slows down on a computer or laptop.

The most common sign of a malfunctioning mouse is the poor laser response to the surface. This can be due to both a poor surface and a malfunction of the laser itself. Therefore, if the mouse operation has become noticeably worse, it reacts poorly, or you have to move it several times more to get the desired result - in this case, first of all, it is necessary to test its work on another surface.

It often happens that people do not clean their computer desk from dust, or even eat after it, because of which more dirt accumulates in the workplace. It is because of it that the work of a computer mouse can be severely disrupted. Just one small hair is enough for the sensor to respond poorly and react incorrectly to the surface.

In addition, many inexperienced users do not know that there is an optical mouse sensitivity setting. For example, professional cybersportsmen set the minimum sensitivity for themselves, which is why they have to perform quick and short movements several times with their hand. For people who pay more attention to working at a computer - this is not necessary, they will need to set the average speed, or slightly higher.

To change it, you need to go to the “Mouse” tab in the control panel on your computer, then select “Pointer Settings” and set the appropriate speed value. Additionally, for more precise mouse control, you can set the parameter "Increased pointer accuracy." When this value is set, mouse movements will be smoother and more accurate.

Important: More advanced and expensive mouse models have the ability to adjust the speed with just the touch of a finger. There is a special button on the surface of the device, when pressed, the cursor movement speed also changes. As a rule, this button has a backlight, the color of which changes, depending on the selected speed mode. This value is called DPI. Professional cybersportsmen pay special attention to it, since it plays an important role in accurate and fast management.

Most common causes

It is almost impossible to fully describe all the existing causes of poor performance. This can be due to both mechanical and technical damage to the mouse, and due to problems with the computer itself. However, it is worth highlighting the most common problems that users encounter. Typically, these are:

1. Too rough surface - mouse pads are one of the important factors for comfortable work. It often happens that the devices are completely unsuitable for each other, making it virtually impossible to use a computer. In addition, many people use the device on any surface - a table, book, stand, etc. With this method of operation, the device will not last long, and will require replacement.
2. The presence of contamination - As mentioned earlier, the cleanliness of the house will also have to be monitored. Otherwise, computer control will be incorrect.
3. High humidity Is already a more serious problem. In this case, management will not only be impossible, but there is a high risk of a complete loss of the device. Therefore, work must be carried out strictly on a dry surface.
4. Lack of drivers - The problem is often encountered when replacing a device or updating an operating system. When connecting a new device, it is necessary to install special drivers that come with the product on the installation disk. If this is not available, you must install them manually by downloading them on the Internet.
5. Damage USB entry - Perhaps this is the most serious and serious problem. Fixing a connector is usually quite difficult, and sometimes almost impossible. Complicates the work and the fact that the connector is part of the motherboard, which is the main element of the computer. Therefore, doing such an repair is very difficult and quite dangerous. However, in such cases, only the fact that several such USB inputs are located on the motherboard saves, so you can safely continue to work if they are not occupied by other devices.
6. Mechanical damage - the wire is broken, sensor malfunction, breakdown of individual parts of the product. Most often, in such cases it will be more rational to simply replace the mouse.

What to do if the mouse moves poorly

Initially, it is worth checking the general condition of the mouse, inspecting it for damage and defects. If visually everything is okay with her, you need to perform several steps:

1. Test her work on another surface, try replacing the mat.
2. Clean the surface of the mat, as well as check the mouse sensor for possible debris, and carefully dispose of it.
3. View information about installed drivers, if necessary, update them.
4. Try connecting the mouse to another USB connector.
5. Use the standard diagnostic system installed in the operating system. It is located in the "Control Panel" section, in the "Diagnostics of Problems" tab.
6. Scan your computer for antivirus software for viruses.

Few people know, but malicious viruses also adversely affect mouse performance. Therefore, in case of problems with the control devices, an additional scan with an anti-virus program will be a necessary and useful solution.