How to open a drive on a laptop without buttons

A device that allows you to read and write information directly to the media, in the modern world, although not in great demand, however, in some situations it is considered forced. Thus, the user needs to know ways to help him open the mechanism. They will be discussed in the written article. And also consider possible obstacles in this case and options for their elimination.

How to open a drive with a button

In most laptop models from different manufacturers, the opening can be reproduced thanks to a certain press. Often the product is located on the side or on the surface of the drive disk.

Attention! Preliminary, it is recommended to verify the availability of the structure. To do this, it is advisable to refer to the equipment documentation, which contains all the characteristics assigned to it.

In addition, you can consider the body of the unit. A rectangle with the inscription “DVD” should be indicated there, and in the task manager, in fact, its version should be indicated. So, if you find the relevant information, then you should go directly to the main process - discovery. As you know, the location varies depending on the computer model. So, the most common ones are: the area located next to the drawer; optical drive cover; side part (usually right) of the invention. In any case, you just need to hold the part for a while and wait until the drive comes out. It takes a few seconds - from one to three. The key is easy to find, since it is indicated by a special symbol as an arrow or dash.

Why the drive does not open when the button is pressed

It is common for each technology to fail, so any malfunction is a natural phenomenon. In this case, it is not necessary to resolve the situation by sending for repair. It is likely that the user is able to cope on their own. However, this requires appropriate knowledge and skills. So, preliminary, of course, it is impossible to find out the source of the defect. But often the problem is temporary. Therefore, you just need to restart the computer and try again. If this does not work out, then gradually proceed to the following manipulations:

• The first thing is recommended to restart the laptop. We can say that due to this action all program parameters and commands in the control will be reset.
• Most likely, you in a hurry installed the disk incorrectly. Consequently, contact is closed inside, and this will require a little physical effort. To do this, arm yourself with a sharp object. It is desirable that its end be slightly blunt. Thus, it is worth trying to clamp the part and at the same time help it open using, for example, a knife. It is important here not to overdo it, since it is possible that inside the disk burst and crumbled.
• It also makes sense to consider a situation in which a mechanical failure has formed, namely, gear failure. But they are responsible for the extension of the compartment, which is required for installation. It is for such cases that the developers envisaged the implementation of the function through an emergency exit. To do this, the owner needs to get a paper clip to manually set the device in motion. On the front panel you can find a small hole. It is also necessary to stick thin material into it (the needle is also suitable for surgery) and slightly press. As a result, the design should automatically work. Thus, the long-awaited stage will occur.
• Do not forget that the electronic board may also be malfunctioning.
• At some points, malicious software itself blocks the CD. Therefore, updating the anti-virus platforms and checking the system will not be superfluous.
• After all, the windows operating system may lose contact with the drive. This usually occurs due to various errors in the OS. In this case, even a reboot will not be able to help correct the situation. It is necessary to completely disconnect the equipment from the power supply, remove the battery for several minutes. Then return the parts to their original location and bring the laptop to working condition.

How can I open a drive without a button

When using standard software, technology activation is also available using software methods. For example, the following is a sequence that can accurately power a DVD:

1. First you need to contact “my computer”. If you are the owner of 8 or 10 versions of the OS, then you will have “this” instead of “mine”.
2. In any case, folders will be available. From them, select the drive icon and click on it with the right mouse button.
3. After that, a window is displayed in which it is permissible to mark the line “extract”. Usually it is in the middle of the whole list.
4. At the end, the tray itself must get out to a minimum distance. If this does not happen, then you have to turn it off again - turn on and run the described algorithm right from the beginning.

Some users do not see the graph of the required product. Then it is worth fulfilling the following points:

1. Using the auxiliary key on the mouse, indicate “start” and click on the name “command line (administrator)”.
2. After that, you can insert the task "HKLM \ System \ CurrentControlSet \ Services \ atapi \ Controller0" / f / v EnumDevice1 / t REG_DWORD / d 0x00000001 "and then press enter.
3. The very last step is to reboot the invention. So, after all the above operations, a CD must appear in the directory.

In addition, the described product may not exist at all. For example, on some Asus representatives it can not be found. In this case, you must try a separate method in which the keyboard is involved. At the very top, where the functional tools are located, you should find the one that has the name "extraction". If it is present on the panel, it is important to clamp it in combination with “Fn”.

Reference! If the device has blocked the output, then it is better to parse two options for the outcome of the event. The first involves the closure of processes in the task manager, and the second - the use of the "Unlocker" application.