Plaster furnace of bricks with his own hands: oven finishing house photo, plastering furnace, finishing ovens in a private house, lined with ceramic tiles

Of course, each user of the popular heating means wants to make it fit into the overall interior room. To do this, it is possible to make it trim, and with the help of various materials. The range will be based solely on the personal preferences and abilities of the hosts. Finishing ovens with ceramic tiles with their hands in a private house It requires the availability of certain knowledge, just the same as plastering. For inspiration You can see the photo. However, it should take into account some of the nuances. About them and about the whole process and will be discussed in this article.

The choice of material for the furnace lining

That progress was feasible, it is advisable to understand how you interact with furniture. And you should pay attention to certain points when the topic concerns the choice of products. For example, when choosing a ceramic tile, consider the following:

• Most importantly - environmental safety. Be sure that there is the presence of a special certificate.
• Appropriate size and shape. If you adhere to the guidelines, it is best to buy small-sized tiles. This is because the small parameters are guaranteed less delamination. With regard to the second aspect, so should choose simple products, so as not to exert maximum effort. But if you want to image, the method of laying will be much more difficult.
• Specifications. These include as strength, resistance to stressful situations, and the level of moisture absorption with a coefficient of thermal expansion. In addition, it is important that a product properties include fire resistance and reliability.
• In addition to the mandatory parameters, there are also indirect but no less important. For example, the correspondence between the interior and the shade material.

In addition, you must purchase the components listed below:

• Plaster.
• The solution is a primer in order to process the wall.
• Specially designed tile adhesive (heat resistant).
• Mix for grouting. She needed when mashing seams.

ATTENTION! Before purchasing the tiles, it is advisable to choose, taking into account plus / 5-10 minutes reserve. Since no one is protected from the defective product and errors in the work.

Design development

It is important to pre-pay attention to this issue. On which you choose the interior, and will depend on the answer. Popular enough said image Russian cuisine. At the same applies rustic style, where you will notice a little rough surface finish. But this is not the end of the description. On all affected only a fantasy wizard. Therefore, there may be a variety of options for arrangement of space and quite unlike the usual, it would seem, to the public reproof.

At independent construction also has the demand brick laying form. But it is usually not used additional cladding, as he himself considered to be the main element of decoration. Despite this, the finish still need to produce the material was maintained for years to come. As for other design options, so it's encasing design tiles or stones. But it is worth remembering that the final result will always affect your ability and how you have chosen a difficult path to the goal.

Plaster for lining furnaces of stone

Plaster furnace of bricks with their hands is the most simple and easy way to transform the look of the building.

ATTENTION! Before starting the process of work is necessary to sustain a certain period, consisting in one month in order to have time to sit down the whole structure. Once this period has passed, you can safely proceed to the next steps.

They represent a special series on the preparation:

• Eliminate all possible dirt and dust.
• To create a uniform surface by the primer.
• Deepen all seams.
• Using grained grid make tight device.
• Then you can safely begin heating design, and its walls slightly moisten due to the application of water.

It is important to remember that the very plaster is applied in several layers. Due to this, one should get a smooth layer. But between each times the interval should be at four o'clock. The new application is determined after complete drying of the previous one. Additionally, the first layer should be formed from a sufficiently liquid solution. This is necessary in order to align all possible angles and create the most smooth surfaces in the building. The result - due to the strength of the unit finish.

Tiling: profitable and easy

One alternative would be to use a material such as ceramic tile. If we talk about the composition and its manufacture, it is worth to notice the presence of colored clay. Most often decorated the front of the decorative painting. If you wish to save, you can draw attention to the terracotta product. For fans of a large range of drawings, this option is the most acceptable, moreover, it is a budget. You can select an image that mimics natural stone or brick. If you are serious approach to the design of reliability, it is desirable to acquire a type of ceramic - clinker. Its properties are due to the fact that it is composed of the highest quality grades of clay. Therefore, even large temperature jumps are not able to break through the surface. A special composition can be used to impart maximum stability. Besides these advantages, it can be said about the simplicity of the process. Before you start you just need to be reinforced and plastered the entire surface.

Working with stone

In today's time it is increasingly gaining popularity is the kind of lining. When choosing a building material you can pay attention to what is provided for use as an artificial stone and natural. But the first and second have not only a pleasant appearance, but also in high levels of fire resistance. In the long period of operation, when the appearance of the material will not be so fresh, it was the original, you can easily update it by painting in a new shade. Now that dealt with some nuances, you can go to the steps to be carried out:

• The first step is priming the entire available surface.
• Next, you need to make packing from the bottom of the structure. It is important at this point to use the building level, that certainly will not go wrong with the height.

REFERENCE! The paper also apply special solution. It usually consists of sand, cement ai various additives.

• Some add small particles of drywall. It is needed for jointing seam.
• After that cut the stone using grinders and disc. It should be set to low speed. This principle should be followed in order to avoid the possibility of debris falling.