Often, in everyday life there are situations when you need to bring is difficult to remove stains and usual cleaning chemicals do not help. Throw furniture or to make repairs - it is not an option. As part of this article will look at how in just 30 minutes you can personally make a simple steam cleaner and get rid of with the help of the problem.
What is needed for the manufacture of home-made steam cleaner
The content of the article
- What is needed for the manufacture of home-made steam cleaner
- Steam Cleaner with their hands
In order to create a steam cleaner with your hands, you need the following materials:
- Glass jar with a small volume screw cap - suitable from the juice, jams, sauces, etc...
- 3 conventional razor blades.
- Strong cotton thread.
- Matches.
- A small tube is away from the dropper.
- Otrezochek small insulated wire.
- Conventional gum, which are often used for money.
IMPORTANT! The establishment of such primitive devices can pose a potential danger to human health, so you should carefully treat the process of creation. In conducting such a procedure, in practice, it is important to understand that the overpressure apparatus and vapor can explode or cause injury from electric shock.
Steam Cleaner with their hands
For warming up the liquid in a primitive device requires a so-called electrode heater. In his role can be used already previously used blade from the usual razor. In conventional match can be used as an insulating member. The design connects with the help of strong cotton thread. Supply of electric current stranded insulated wire is made of copper.
We use three conventional razor blades. This makes it possible to significantly increase the area of the electrodes in the implementation of the electrical power network with a voltage of 120 volts. When using electricity with a voltage of 220 volts, it will be possible to use only two blades.
Next stage. Must be made in the metal lid on the used capacity three matching size holes. To use the tube you need more, and for electrical wires - smaller. The size should be determined depending on what kind of wire and tube are used. After fixing, they must be carefully sealed with silicone sealant.
This design looks as follows:
As a result, should get a tank:
ATTENTION! To prevent explosion of the tank created by the high pressure steam generated is not necessary to twist the cover tightly to all threads. It should be pressed to the bank with the help of stationery rezinochek for money.
Such a device can be used in practice to remove any dried dirt, get rid of that by using our usual chemicals and cleaning rather difficult. High efficiency personally created device is proved by the example of practical application. And most importantly, you will be able to do with his own hands for the shortest possible time. Let's hope that this technology will help!
