Any equipment powered by electricity is discharged from time to time. The xbox 360 joystick also requires recharging. There are 2 ways to do this.
We charge the xbox 360 joystick using a special wire and xbox
The content of the article
- We charge the xbox 360 joystick using a special wire and xbox
- How to charge the joystick from the network
For the procedure, you must have a cable. You need to take the battery pack and do the following:
- Find the tab at the top of the AA battery pack.
- Squeeze the pattern lightly.
- Open the gamepad.
- Insert battery.
- Snap fastener.
- Connect the cable to the charging port.
- Connect the charging cable to the controller port.
- Activate the xbox 360 console.
- Look at the color indicator (if the red light is on, then the device is energizing. Green indicates that the battery is ready for use).
While the process is going on, you can play. Signals are transmitted seamlessly. But if you disconnect the cable, then the device’s recharge will stop and after a while it will be discharged.
To prevent problems, occasionally wipe the xbox with a soft, flannel cloth or sponge. Chemicals cannot be used. Also no water needed.
How to charge the joystick from the network
It must be borne in mind that the voltage at the output of the joystick should have no more than 3 Volts. To do this, you will have to purchase a resistor or a special step-down DC-DC converter. Then there can be any voltage at the input, usually 5 Volts, and there will always be 3 at the output.
Common parameters: 5V, 450mA. You should purchase a 3 Volt power supply. The device must have a battery, otherwise it will not be powered.
You can use the usb inputs on your computer with Microsoft Windows, Windows 10 software. Some use recharging from a mobile phone, smartphone or iPhone. This is where power converters are needed. You can also power the joystick from the TV. For the procedure, a special cord, wire, cable, extension cord is purchased. On devices, they look for the presence of the corresponding inputs.
