the problem of tangled wires at the game console has been solved thanks to the development of technology. Now, all modern consoles are equipped with a wireless joystick connection system. Gameplay PS4 depends on sustainable and high-quality response from the joystick, however, even the most modern technologies are failing, and many gamers are faced with a lack or delay signal.
Why gamepad does not connect to PS4
The content of the article
- Why gamepad does not connect to the PS4
- How to solve the problem, if the joystick is not connected to the console
Understand that the joystick functioning Failed very simple - at its end is the indicator light, the color of which varies depending on the activity of the gaming regime. If a light signal is stable, then the device is connected and ready to use. However, it often happens that the light glows or flashes white. This means that any synchronization problems. After one or more unsuccessful attempts pairing indicator color changes to yellow. This means that the joystick does not work.
There are several reasons that prevent syncing the controller and the console:
- Error in the synchronization process.
- signal lock.
- The error or malfunction in the software.
- A technical error.
Based on the complexity of the problem, it can be fixed by yourself or contact the service center. The latter method will be relevant only if none of these methods did not lead to solving the problem.
ATTENTION! If the problem is related to the "brain" of consoles should not try to solve it on their own or refer to the "Craftsmen". Technical work of this level should be carried out by qualified personnel in the service center.
How to solve the problem, if the joystick is not connected to the console
Depending on the cause of the fault, there are several ways to eliminate it.
If the signal is blocked, first of all, you need to check if there are any obstacles to its passage between the gamepad and the console. The reason for failure may also serve a large distance between the prefix and the joystick. For the diagnosis and synchronization, you can connect them with a USB-cable. If an error occurs, or error in the program, you need to reset by pressing the Reset, and then start the synchronization process.
IMPORTANT! If the light on the controller keeps flashing white or yellow color, it means that the cause of failure is a technical fault. In this case, you must include the joystick to a certified service center.
It happens that the only safe mode is activated. Typically, such a fault occurs if the controller has been connected to the PC. In this case, a gamepad can not be synchronized with the console or only work in safe mode. There are several ways to resolve this error:
- 20 seconds to pinch and hold the button Hard reset;
- Perform a full reset;
- replace the chip, which is entrusted with functions of the console interface and joystick.
ATTENTION! The procedure for replacing boards must be carried out exclusively by skilled craftsmen in the service center.
It happens that on the controller light flashes and the console does not function. To eliminate such problems can make a full reset and load the new software.
It happens that the device is not being charged. When the battery is low interruption can occur with synchronization In this case, it is necessary to replace the battery in the feed joystick. If replacement is not solved the problem, you can try to change the charger cord or plug to connect it.
The above are the most common reasons listed why gamepad does not connect to the PS4 console, as well as ways to solve the problem. If you get rid of the problems on their own has failed, please contact the service center to diagnose and repair the console.
