Why the water filter turns green: how to deal with the problem

Many people use water filters, since not everyone has access to clean drinking water. Usually they are very simple to use, and there are no difficulties. But sometimes a water purifier can turn green, and this scares many. In this article, we will find out why the water purifier turns green. And also tell you how to deal with it.

The reasons for the appearance of green plaque

In any liquid, even after a multi-stage purification, microorganisms remain. Plaque, visible to the eye, indicates their excessive amount. There are several reasons for this.

• Intense lighting several times accelerates the life of bacteria or algae.
• Often the cause of greening can be active the spread of a simple organism - Euglena green.
• Misuse filter, it may be damaged or clogged.
• An overabundance of organic elements in the device.
• Rare replacement and maintenance designs.

How to fix the problem

To continue using the cleaner, you must first thoroughly clean it.

How to clean the filter from greens

During cleaning, try not to rush, each stage should be given due attention. Cleaning is as follows.

• First thing shut off the water supply to the filtration system. For this purpose, a so-called “control valve” should be provided.
• If the manufacturer put a special key in the kit with the filtration system, then you need to find it. With its help in the future you need unscrew the flask.
• Then carefully remove the cartridges and put them aside so that they don’t interfere.
• Then it is necessary proceed with flushing flasks and connecting tubes. In this way, we can remove fully multiplied bacteria and mold.

Important! We recommend washing the tubes with a solution of soda or potassium permanganate. A weak pink solution of potassium permanganate copes with the removal of mold and bacteria.

• Further, when the nozzles are dried, you can install new cartridges and tighten the flask.

After that, open the tap to supply water to the filtration system, now you can drink clean water again!

How to use a water purifier

In order for the device to serve you for a long time, it is important to follow some recommendations for use.

• If you intend to leave for a long time, you need to remove cartridges and put them in zip-lock packages. In this form they need put in the fridge. Such storage will extend the life of the elements, and cartridges will not turn green.
• Devices are intended for purification of cold water. therefore do not often pass hot water through them. If you purify hot water, the appliances will deteriorate quickly, and they will often need to be replaced.
• Read in detail the operating instructions for the filter. Cartridges must be replaced in accordance with the period specified in the manual. Moreover, it is desirable to reduce the term in a smaller direction.

Advice! If you want the filter to never turn green, you can purchase an antibacterial polypropylene filter in the store.

Its working principle based on silver nanoparticle technology. This filter prevents mold, it also fights bacteria and various types of fungus.

Now you know why the filter turns green and how to deal with it. We wish you success!