Cupboard under the oven with his own hands: how to make

Recessed oven - very convenient. This device is an independent "player" in the kitchen and you can install it where it is impossible to put a classical oven, combined with cooking hobs.

Set the oven at a very important part of modern cuisine. This built-in oven, hob, as well as a storage box. Such cabinets have indents ventilation device, which distinguishes them from conventional cabinets.

Interesting fact! First built in ovens, there were more than half a century ago. Now, these devices are the most sold in the world, despite the prevalence of classical models of wind furnaces.

types of structures

There are several types of cabinets for the installation of the oven:

1. Built-in-cupboards. In the construction of this type of oven is inserted at eye level, and the bottom set large cabinets for various kitchen utensils.
instagram viewer
2. Under hob. Such devices are more similar to the classic version of ovens, combined with slabs. They are less comfortable than sliding cupboards, because during cooking should always be tilted, that brings some discomfort. Also, there can be problems with cleaning the furnace. But they, in some situations have pros. For example, in a small kitchen is difficult to put a big unit as desired for the oven. Also, such a design is suitable for those who concentrates all items for cooking in one place.

Pros and cons of the design in pencil case

Cases have a number of facilities in the preparation of food do not need to bend down, it is easier to follow the process of cooking food. These headsets are useful for owners with back problems. Of course, their scope is much broader than just a place to wind furnace location. There can be set multivarku, toaster and other kitchen devices.

Since the oven is at a height, it is important that the attachment was strong, because in the collapse of the construction can be injured.

How to make a stand for the oven with his own hands

Make a simple set independently. It is important to have a basic knowledge and the necessary materials. Self-collection is less expensive, and the procedure itself usually takes about three hours. Creation takes place in several stages:

• Dimensions. Standard sizes sets: width - 60 cm, height - 85 centimeters. It is necessary to pre-calculate the size of the headset, the width of the oven was less than 2.1 centimeters;
• materials:

1. Plywood, thickness - 18 mm;
2. Materials for the countertop thickness of about 30 mm;
3. Guides for drawers;
4. Furniture supports (normal, plastic);
5. Evrovinty or SCREW, Screws (3.5 to 16 mm);
6. Screwdriver, tape measure, pencil, ruler;

• Calculations. On the side of the installation location exactly draw a guide for the box. It is important to consider the height of the box. Then drill holes for the upper horizon (the partition in which to put the oven). Do it on the line. Set the guides using screws. The partition will stand over the box;

In the bottom of the drill hole 4, indent left and right -60 centimeters.

• Assembly. Count 5 centimeters from the edges to the middle, to attach the legs. Put the bottom edge by connecting the side portions (holes in the bottom of a specially for this purpose). Screwed tightly to the screw head does not protrude beyond the veneer. Then attach septum konfimarty screwing through the side holes.

Prepare the box by setting the response of the guide.

Proceed to the next portion of the structure - installing hob. Initially, the countertop to determine the center, where the hob will be installed. To do this additional measure an outer part of the plate. After this outline of the future size of the opening, which will be installed inside of the panel. Measure the inside.

It is important to make drawings of five millimeters more for free entry design. Then the drill hole line. It is important that it does not go over the line. The web is inserted jigsaw and cut openings.

Then you try to insert a cooking stove in the doorway. If necessary, carry out additional trimming. Then lock device via fasteners, which comes complete with a plate.

Ventilation

Ovens for very good ventilation is important for the proper functioning. It is important to take care of this before manufacturing stone under the oven. For good ventilation oven set at 60 mm from the wall of the headset, and clearance side and bottom should be approximately 5 centimeters.

Several cabinets are designed with a special clearance between the rear wall and the bottom for ventilation more productive. It is important to take care of it in order to avoid damage to the furniture, as well as damage to the oven itself. Carefully read the instructions in the oven before the stone structure.

findings

Ovens - a miracle art. Once in the world of embedded devices have appeared without the hob, people have the freedom to choose the location of the device. They are compact, they are more useful and interesting features that will help to create culinary masterpieces.

Although these ovens need to purchase a special kitchen sets, correctly understanding in this matter, we can not only purchase convenient and high-quality cabinets, but also create their own hands, with the basic skill and the necessary materials.