Laying tile is carried out at the final stage of repair. It is necessary to observe the basic rules of installation. On the quality of the final result will depend. Tile adhesive in this case plays no small importance. By choosing a solution should be taken with great responsibility. Otherwise, with further exploitation of the tiles may have problems.
What can happen with the tile due to improper adhesive
1) Peeling. Typically, a cheap solution can not provide high quality clutch tiles with varying surface. After a couple of months, the material will begin to fall off or become deformed. Especially when laying tiles made in the bathroom.
2) cracking. Each tile adhesive has certain properties. The packaging is usually clearly spelled out for any suitable surface active solution. Use of the wrong adhesive could cause the formation of small cracks across the surface of the tile. So before you buy you need to consider the properties of the material.
3) It is important to not only choose the right adhesive, but also put it on the tiles correctly. In this case, uniformity of application must be observed. Do not put on too much tile adhesive. Because of this, it will rise by a few centimeters after the solution has dried.
4) Tile begins to move down. Suffice common problem which also arises due to improperly matched adhesive. For example, adhesives for wall tiles is not recommended for use in laying tiles on the floor. The surface will be regularly subjected to mechanical stress. They will cause a shift and deformation of the tiles.
5) mold. It is extremely rare. For example, when installing tiles in premises with high air humidity. The problem arises because the adhesive composition which has no moisture resistance has been used in the process of stacking the material. Thus, after the first washing of the mold can occur under the tiles. And the fungus spreads very quickly. Fix will be very problematic.
5) The deterioration of product performance. Due to improper adhesive, which is used for mounting on the tile can form spots, various small defects: scratches, cracks.
Thus, when choosing a tile adhesive, pay attention to its technical characteristics the properties in order to avoid unpleasant misunderstandings in the future.
