How to turn off the printer status monitor

Developers of electronic devices, whether phones, laptops, coffee, or any other devices filled with chips, are in constant competition with each other. In the presence of approximately equal amounts of resources and quality of assembly. Superiority can be obtained at the expense of the original design and a set of advanced features that provide ease of use. To the category of such technical elements include the Status Monitor in the printer.

That means the printer status monitor?

This status is a utility - small program to monitor the status of the printing apparatus and control the work from the inside. It sends a notification to the user if there is a problem. In addition to the control function, the status monitor can also provide technical support and duplicate icon issue on Windows, displaying the certificate of a particular event relating printer.

Status Monitor appears and is included only if the printer is connected directly to a PC via USB-cable or network cable. This tool does not work on the secondary computer network elements to which the printer is connected wirelessly.

In theory, this program element carries in itself a benefit and convenience, but in reality its implementation is often far from perfect. Many users complain of glitches and freezes the program, as well as unnecessary additional slowing of the entire PC system another background process. If the printer is connected to your computer and running, its status window will pop up all the time on top of other windows, which significantly hurt the productive use of the computer. The following describes how to disable the "Monitor" status and further its inclusion, if suddenly need.

How to disable and enable status

The process of turning the monitor status is as follows:

• Insert the printer USB-cable into the input slot on the computer and turn it on.
• Wait for a full run of printer systems. The preparation for the work depends on the model. Older versions of the printers run very long.
• After that, you must make sure that the computer is synchronized with the operating system printer tasks. To do this, you need to call the dispatcher printers and faxes (Windows 10, this window is called hot keys) and find the printer icon. In Windows 7, it is enough to click the left mouse button in the lower right corner and make sure that the connected device has a printer icon, and she ticked.
• Now you need to go to the "Start" menu, and choose the right side to open a mini-window select "Control Panel."
• A new window opens. At the top of the screen on a white background is a dropdown list of "View." For convenience, it should be found in the pi mark an item "Category" - so the user can immediately find the desired section from the pictures.
• Find the section "Devices and Printers", click on the left mouse button.
• System User translated into yet another new window, which displays all third-party devices connected to the computer motherboard. Sometimes here it displays some soldered to the board modules. But this happens rarely.
• Find the image used at the moment of the printer and click on the right mouse button.
• Fall menu where you should select "Properties".
• Will pop up a small window that is divided into several tabs. First need to "General" tab to open the print settings.
• Now you need to go to another tab, it is called a "service" where to click on the "print speed and progress" at the bottom of this small window.
• This will open another menu where the user finally will be able to tick a canopy to "Disable Status Monitor" option. "OK" must be pressed to save the entered changes.
• Now, the status will no longer bother your user enabled state, jumping on top of all other windows and disturbing work. But we should not forget the way to this section once and for all. If at the time of printing is not performed any important action on the computer, then it is better to translate this utility is included in the position to obtain information on the status of the printer.