How to connect ps3 to the monitor via a network or cable

Despite the fact that already formed a new generation of Play Statoin, the majority still uses just the third series. Therefore, we need to understand where there is a significant demand. Game console allows you to not only play different kinds of games, but also watch movies, listen to any music and even send e-mails.

Actually, the issue of such a unit is stopped as early as the year before, in 2017. In this same article, consider connectivity options, as well as analyze tips that may be useful in the implementation of the action.

How to connect with a cable,

As you know, there are different types of cables. The process itself should begin with fixing the HDMI monitor.

ATTENTION! In addition to the named product can be used and DVI, however, needs to be a special adapter.

If the manipulation to make it is impossible, then try it to finish strongly discouraged. Next, everything is much simpler: you have to listen to the sound in the event that there is not provided in the column. This is done through two ways, at your discretion:

• Using the "tulip". To do this, connect the cable to the console as follows: the red and white connects to the entrance. It is most commonly located on the back side of the device. After that you need to go to settings and perform a certain operation. It should be noted, "Audio Setup." You will be available to the window "Audio Output Settings", where you should choose the option that is at the bottom. Therefore, the data must be fixed for the completion of the stages due to the mark "X".
• Optical cable. It lies in the fact that one of the ends is based on the console, and the other - in the columns. After that, you must also enter information for setting up the menu. Actions are the same as those described at the beginning of the paragraph.

Which cable can I use?

As is known, there are several varieties of the product. Thus, we consider each type of connection, the appropriate model.

1. The easiest and perhaps the common way - using hdmi. Included with the game console it is likely, will not. Therefore, you need to buy it on their own. To achieve results, it should be fixed in one end of the product, and the other - in any available slot. After that you can safely run console and find the channel that is directly connected to the unit.
2. With AV. As with the previous method, this is not very complicated. It is necessary to compare all of the items with the corresponding color.
3. "Tulips". Also in great demand, as availability is at a height. Especially saves when the product is manufactured according to the old model. The whole process is similar to the attachment of one end of the cable to the product, and all the cables are matched in shades connector.
4. Do not forget about such an output as SCART. All the same manner as described above in stages.

ATTENTION! You need a special adapter. Also, do not miss the fact that the button must be held until the audio signal of the second bank directly with the ps3.

Can I connect over a network without a cable?

Yes, the answer to the question is really positive. However, this method requires a bit of specialized knowledge. Therefore, you are granted a plan with actions in sequence:

1. The first step is to open a folder on the PC under the name "Network Connections."
2. There you select the adapter, and turn it off. Then you can go to the "Properties" section.
3. In the allowed list, you can find the "Internet Protocol 4" and click on it, will continue to be available ip.
4. You will need to specify the subnet address, save it and re-activate the adapter.
5. The equipment itself is connected via cable PatchCord and play station is included.
6. During activation, the product should go to its settings, where speed is converted into an automatic way.
7. At the end of the process should write the ip address on their own, then it will be a major on your computer.

Wiring recommendations

As you can see, if you are the owner of the device with a cable, the execution of the described manipulation does not It will be a single work, as they are accessible to everyone, even the most inexperienced user. In addition, it is important to have in place some adapters if you need it.

Immediately upon setting up a functional due to a network, of course, the complexity increases. However, in compliance with all of these things, you can also achieve impressive results. Also, do not forget the audio output to the speakers, if they are available. This is best done in the process of setting up all the parameters to the output you just had everything ready.