The printer does not see the cartridge after filling: what could be the reasons?

Printers are devices peripheral clearance information, the basic principle which It is to convert the electronic file format to print the form for applying them to paper carrier. Current models have been used in offices, large enterprises, and have become indispensable for the work at home.

One of the main elements responsible for the full operation of the equipment is a cartridge. For the correctness of the action system must correctly identify the delivered item to its further use for the purpose of applying the print on the paper. But sometimes at the stage of recognition problems, the printer simply do not see the installed cartridge. In this case, you should immediately find out why the printer writes that there is no toner, or it is blank, even when the cartridge is filled.

Possible Causes and Solutions

If you encounter this problem, it is necessary to know the source of its origin. The most frequently encountered the following problems:

1. Improper installation of the element in the corresponding compartment. Some items may be loosely coupled, in which case the computer will issue a warning of the absence of ink cartridge or when printing.
2. Established non-native hardware. Many manufacturers have recently started to set up interlock system so that users purchased a new original elements.
3. Mismatch mark device with the type of ink used. As a result, this technique can not only see the cartridge, but the break in service.
4. The use of ink with a different way of drawing on paper. Some devices have particular application footprint.
5. Damage to the sensor or chip on the panel, which signals the readiness for printing.
6. Also possible are more serious faults in the software and system failure. To solve the problem will require a complete diagnosis of equipment.

To avoid potential problems enough to use the native version of their work through the printer will be implemented in its entirety without interruption. However, a permanent replacement will cost the user is too expensive. In this case suitable refill. If you decide to use the dressing in advance check the compatibility of your brand with an installed equipment.

Important! Manufacturers strive to create conditions to prevent refilling of ink. In earlier versions, is almost never used the lock, so working with them is much easier and more profitable.

The printer does not see the new cartridge

If the printer does not recognize the newly purchased item, make sure that it complies with a given type of device. The necessary information you can read on the printer and cans of ink used. You can also navigate to the starter kit (native element mounted inside the case with the purchase), just buy the model that was used originally.

When using an appropriate model should work correctly after confirming the status of the ink level when the cartridge is inserted, you can print documents in normal mode. If the printer does not see the item, please note the following items:

• Combination of sensors on the housing with the sensors in the corresponding compartment.
• The position of the cover above the print machines.
• The correct location without any visible discharge of.
• The free compound with sensors, the lack of retention film.
• The integrity of the case, the absence of mechanical defects and damage.

When problems are detected, try to resolve them yourself. Properly secure the locking clips ensure a tight lid, remove the switch closes its label. After attempts to solve the problem, restart the equipment. In modern models installed automatic troubleshooting.

Important! It is not necessary to press hard on the part of the device, it can cause damage. In the original versions of all it closed fairly easily, effortlessly.

The printer does not see the black cartridge

Now a closer look at possible faults for each version of the cartridge. Let's start with the classic black model. Typically, installation is not difficult, you must open the printer cover, find the compartment and insert the element. After that, the computer will automatically recognize the device. In the absence of all check result according to the plan described above.

In addition, should pay attention to are located in the sensor housing. Some manufacturers specifically put in a set number of chips to replace. In this case, make a replacement under the plan:

1. Unplug the old sensor from the attachment.
2. In its place a new chip set from the kit, run the program to print.
3. Run a test sheet printing for quality assessment application display.

Important! This embodiment is useful when re-fueling, use the sensor to the system error has not issued when using the non-native element.

The printer does not see the color cartridge

With color option the situation is slightly more complicated, because there are different versions and brands. To get started is to choose the right model. To start this number on the cartridge case to the type of element in the device. There are three types of replaceable elements:

• Original models.
• Universal versions which are suitable for different brands of equipment.
• Reusable options.

Check the integrity of the cartridge and, thereafter proceed to system settings for controlling operation of the apparatus.

The printer no longer see the old cartridge

In the event that a problem arises with the old cartridge, the reasons for the lack of recognition of the system are in a natural defect. Due to the long operation may be erased print nozzles and sensors, in addition, the printer itself may be damaged. Depending on the equipment life is worth to take a decision on the repair or complete replacement. you can try to restore the work to perform the following manipulations:

1. Inspect the body, identify the source of a possible defect. If possible, seal it with tape or duct tape.
2. When a discharge sensors can use special clamps. an ordinary piece of paper can be used for this purpose, folded several times.
3. It is also possible malfunction under prolonged stagnation engineering. Accumulated paint can get to the clips and the nozzle, and then dry out. Clean nozzle automatically or manually.
4. Due to the severe injuries member can not carry out their duties in such a case, make its replacement.

Important! In every detail has its own lifetime. Periodically inspect the standing body in order to diagnose and solve the problems.

What if the printer does not see the cartridge?

If none of the proposed list will not solve the problem, most likely, there is damage to the printer chips. Can you make out the design and see the damaged parts, we can replace them with minor breakages.

But most likely, the internal components will be significantly damaged. In this case, it is not necessary to make unauthorized repairs. You can contact the service center, there is the guarantee will provide free help in a thorough diagnosis and troubleshooting.

It is likely that the device is out of order due to the long-term operation. In this case, much more profitable to buy a new model. You can watch the popular version of the internet to pick up the perfect balance of price and quality.