Table circular saw with his own hands: drawings, description of the work

Table with special openings is a convenient option manual fastening of the saw blade a certain diameter.

The design has a number of obvious advantages. She It allows you to do much more work with minimal effort and with great precision.

Stationary positioning of the composite tool ensures a high level of security for staff and increase the life of the device.

Homemade table under the hand circular saw is advantageous for use in cases where the amount of work is not so big and acquire special equipment does not make sense. The cost of the device is often manufactured from scrap materials is much lower than the commercial product.

Tell us how to make the required table with his hands.

What should be the table of the saw blade

The complexity and danger of the work to be performed on a makeshift table for circular saw, involves first

concern for durability, its resistance to multidirectional loads.

IMPORTANT! Circular saw at work causes significant vibration, its power is quite large. Therefore, the design must first take into account sustainability issues.

devices include the following parameters Other important features.

• The smooth working surface, the presence of barriers.
• Availability of management tools, particularly the ability to quickly disconnect the power supply.
• Having all the tools necessary for high-quality and productive work. Namely, the rip fence, gon, carriage, devices for lighting, for cleaning the workplace from chips and dust.

The main task for the sawing table - quality execution of transverse and longitudinal cuts of materials from different types of wood: solid (oak, ash), soft (linden, pine).

In this case, the important is the possibility of high-performance work, especially in the adapted conditions - at the construction site, in the garage or in a shed.

Materials and tools for manufacturing

For the manufacture of the carcass is usually used a metal bath or profiled tube from the bonds of carbon steels. Great bar from solid wood, especially oak, ash, maple. Good resistance to various surfaces and resistance to loads also provide a high quality laminated materials.

the work surface requirements include resistance to bending, the presence of a flat smooth surface, sufficient slipperiness. therefore often it is made of chipboard, MDF or metal sheet.

Fasteners for saws and for auxiliary devices preferably rustproof. Devices liner supply should be operating.

How to make a table of the saw blade

Prepare all the necessary, you can start to work.

Details of the table, their dimensions, drawings

Hand circular saw, installed in the table, must be attached securely and firmly. Respectively, required inflexible material countertop. If a wooden plate, its thickness should be not less than 20 mm, for low-power devices.

The length and width of the construction are selected based on the features and operation of blade parameters. For device power up to 1.2 kW is usually sufficient 1000h600 mm.

construction height should be suitable for work. It adapts to a particular artist, it is about 650-650 mm.

The hole for the saw located offset to the right side and the width at the center in length. For mounting and fixing parallel stop and polygon should produce corresponding grooves in the table top.

Assembly

First, the base is made of the product.

Important! If you use a metal corner profile or tube, it should provide a reliable and durable weld.

After the end of welding should be cleaned and paint products. Wooden structure bolted, self-tapping screws, other devices.

Worktop usually attached to the base by bolts the heads of which are recessed relative to the working surface level.

helpful hints

• It is recommended to take care of the well-lit work desk.
• Luminaires mounted on the right front, at a sufficient height.
• The table is set on a flat surface. On its preparation should take care in advance.