The specificity of heating residential premises are lower requirements of the climate in these areas. This may be a reduced amount of oxygen, an unacceptable for premises and an increased amount of carbon dioxide and other exhaust gases. Because of these requirements the owners of such premises are trying to save on heating costs, which in today's world is quite expensive. These facilities may include garages, warehouses, repair shops and much more.
The principle of operation of the device
The content of the article
- The principle of operation of the device
- Drawing to create a furnace at working off their own hands
- The assembly unit
Standard or conventional fuels such facilities are considered to be quite expensive, and the owners are trying to take advantage of cheaper fuel option. One such option testing of technical oils. This can be a motor, gearbox or transformer oil.
Important. What kind of oil would not be selected in any case it must be cleaned, not only from mechanical impurities, but also on the chemical, namely, it can be a problem at home.
So, let's understand what is working out. This oil has fulfilled its task when working inside the engine or other elements of the car or a tractor. Testing at high production is unaccounted for by-product that can give away or for a small fee.
From the standpoint of chemical composition, carbon compound is obtained after processing of oil in the preparation of lighter fractions such as gasoline or diesel fuel. And has good ability to not only light but also generate heat.
Oil furnace at working off their own hands have such advantages:
- The simplicity of design;
- Expensive fuels;
- Large reserves of this fuel especially in large enterprises.
The disadvantages of ovens should include:
- The presence of an open flame, which means lack of oxygen in the room.
- Lack of speed control systems burning or they are very expensive.
- The complicated adjustment system for complete combustion.
Oven for working off is arranged such that two combustion chambers located therein. In the first chamber directly burns the waste oil, separating the plurality of wide variety of gases heated to high temperature. These gases are mixed into a portion of the oxygen from the air and this mixture enters the chamber, two, where the final combustion of the mixture and recovering a large amount of heat.
Drawing to create a furnace at working off their own hands
The Internet is a large number of original designs stoves waste oil. All these developments put on public display, and their authors are not only willing to share secrets their development, but also ready to help readers who would like to assemble a stove own hands. On Web sites on the Internet quite a lot of photos of existing stoves, and many present even video of their work.
Most of these stoves are made of ancillary materials, which in garages and backyards enough. For manufacturing furnaces often use sheet metal thickness greater than 4 mm. Or, as noticed by many craftsmen fit a used gas cylinder.
Get the rest of the design elements is not too difficult and the minimum set of hand tools required.
The assembly unit
According to the reviews the owners of existing furnaces the assembly of such a device is not a big deal. This work does not require special accurate details. Step by step instructions for assembly and commissioning of the furnace waste oil is also easy to find on the Internet.
Important to remember! Before you start commissioning, it is important to carefully check the furnace build quality and fuel leaks.
Save on heating residential premises can be, when it is not necessary to invest in this business a lot of money. With ancillary materials may produce and install a compact furnace waste oil and heat residential premises.
