How to drill ceramic granite tiles on the floor

Gres is a unique material for decorating both the floor and walls. Drill it is quite difficult as material is distinguished by high hardness and is resistant to any attack. Read more about what tools are needed and how to make a hole in the tile of this material.

The need to drill ceramic granite tiles in the floor?

To quickly make a hole is necessary to prepare a specific instrument. It is better suited for this task without percussion drill mode. If there is such a function, it must be disabled if possible. Otherwise there is a likelihood of damage to the surface. Need special tools:

1. Diamond drill. It makes a hole in one minute, which is its undoubted advantage. They drilled and tile. Also has a long life and the ability to run dry, there are no permanent water sauce.
2. Crown with diamond Electroplating. This is the most budget and affordable option. In addition, it reduces stress and gives you the ability to increase speed and performance. Of the minuses allocate their short lifespan. For example, drill tile size 8 mm. It can be about five times. Suitable only for wet cutting.
   instagram viewer
3. An annular diamond drill produced sintering method. It makes a hole for 3-5 minutes on a low pace. It creates a great end the onslaught, which affects the quality, especially for inexperienced artists.

ATTENTION! In an industrial scale using waterjet cutting technology. Therefore, if you want to make a large number of recesses, it is best to find a specialized organization.

How to make holes

After the selected device can proceed to the drilling process. First of all it is important to know that the drilling is done only by two-thirds the thickness of the product. The rest of the element is knocked rapid movement of the rod. Observe the following guidelines:

• The tool must be kept strictly in a vertical position and without strong pressure.
• Work is done only from the front side to the surface on the left of chips and cracks. After the reverse side does not need beauty, and hide all the flaws in the cement slurry.
• Use of the substrate. In order not to spoil the work surface under the granite enclose a sheet of plywood, particle board or other wood material.
• Drill should bring already switched on, the drill bit has worked at top speed
• The tool does not slip away, on the tile surface can stick tape.
• For simplicity, should draw guidance of planned openings. For these purposes, you can prepare in advance a template and secure it. The template is easy to make an unnecessary cut a tree by drilling holes in it the same nozzle to be used for the tiles.
• To cool the drill bit using a conventional water. It can be poured as a work surface, and in a special container.

IMPORTANT! In the process, should observe safety precautions. In particular, it is not necessary to guide the drill tip to the face, because the hot oil has an expansion property and can cause leakage.

Features stoneware tiles

The main difficulty of drilling porcelain tiles is that, along with the exceptional hardness of the material are of the highest fragility. There are the following features of the material, which have a direct impact on the process:

1. exceptional strength;
2. resistance to mechanical damage;
3. abrasion resistance;
4. a variety of colors and textures;
5. low coefficient of water absorption;
6. uniformity;
7. easy transfer of temperature differences;
8. resistant to slip.

REFERENCE! Various types of stoneware tiles may have a hardness of 6 to 8 on the Mohs scale.

Due to its unique features and coating iznosotoykosti of porcelain have become very popular. To work effectively with it is necessary to have special equipment and have specific knowledge. We hope that the recommendations in this article to help get the job done efficiently and quickly.