How to assemble a nightstand with drawers: the order of execution of work

By purchasing in a store of furniture for home and garden, many guided by the principle of simplicity. Choose something more or less the right size, paid, I got home delivery. It remains only to collect. Well, that is always present in the kit assembly instructions. However, for many, it becomes a problem. Not having the appropriate experience and understanding, easy assembly turns into torture.

To simplify this task masters, analyze the process of assembling the example tables with drawers. Knowing how to build a bedside table with drawers, you can do it with other objects. After all, the rest of the furniture is going to similarly.

Tools and materials required for assembly

Before proceeding to the assembly of furniture, in order to avoid surprises,

check the packaging of purchased materials and fasteners are in a box. The name and quantity specified in the attached instructions. As a rule, included are the following parts.

• Slabs of wood plywood, the cut to desired size. The walls, the cover, the base product, as well as exterior, side and back of the drawers. The bottom of the boxes and the back wall stands, often made of thinner material.
• The legs or castors for base.
• Elements for fixing parts together: wooden dowels, special wood screws, self-tapping screws and small nails.
• findings (Handles and rails).

A tool that will require

To assemble the cabinet, take care of such instruments.

• Phillips screwdriver for the screws. If the manufacturer for fastening suggested to use a special evrovint, the set must be Allen key.
• Hammer.
• screwdriver.

The order of assembly tables

If done carefully and in order, until the time when you see the result, it may take quite a bit. Yes, and the process is quite simple.

Putting the base

Choosing a slab marked in the manual as a base. Distinctive features: it is less than the cover and on the lower plane has holes for fixing legs.

Then, using a screwdriver or screwdriver screws anchoring legs (Wheels) on the base plane.

The opposite plane in the finished hole inserted wooden dowels and hammering with a hammer until it stops.

The walls and the cover

Preparing the wall in front of the housing assembly

Before proceeding to the final assembly, on the wall bedside, attach the guide rails. Screwdriver (screwdriver) in a predetermined spaced openings manufacturer We are screwing the screws, fixing of the rails. On each side of the three pieces.

The main frame

The remaining sheet piles hammered into the cover. Take intended for walls and slabs accurately nasazhivajut prepared holes in the lower ends of the dowels at the bottom. From above in the same way fasten the cover.

Important! To reinforce and stiffen the structure, plywood, intended for the rear wall studs pierced by the perimeter of the assembled product.

Complement cabinet drawers

The order of assembly of the sliding part of the same, except the bottom.

In all parts of the drawer there is a slot in the plywood boards over the entire length of about 5 mm deep. It should be insert bedplate and only then proceed to the final consolidation of the frame.
On the outside of anchoring the mating guide rail.

Done! It only remains to fasten the handle screws and insert boxes belonging to them on the spot.

helpful hints

• Dowels and screws to more easily twisted in plywood, lubricate the working part of the soap.
• Be sure to use glovesSo you will save your hands from splinters, the formation of blisters and the occasional pinch of skin.
• Provide free workplace and individual boxes for different types of fasteners.