How to flash the printer? Why and how the printer is sewn

Nowadays, it is impossible to imagine a home or company without a printer. This device has become indispensable for the implementation of a print job, which is getting bigger every year. The main element for the implementation of the work of any printer is the cartridge.

Without it will not form a mark on a piece of paper. There are various options that differ according to the type used colorant hue, density... Many users in the operation of equipment used Refilling cartridges to save money on the purchase of consumables materials.

Most manufacturers are trying to create universal elements of his technique to avoid re-use element. They create unique compositions, complementary chips and housing codes. Users, in turn, found a way to solve this situation.

Important! Almost all manufacturers write a warning on the invalidity of the guarantee when using non-native elements.

What does it mean to flash the printer?

In this article we will talk about how to solve the problem of reusing the cartridge. If your vehicle is not worth a special chip can safely refill the cartridge yourself, or to turn to the master. In this case, no additional manipulations, each subsequent use of the cycle will be:

1. Application of paints on printed paper sheets. Typically, in the description stated for the maximum number of printable pages is calculated volume of the cartridge.
2. Deleting an element of a body, its purification from dried ink refill.
3. Installation on a former place, re-use.

Usually in this case, everything works fine, but sometimes the program issues a warning about low ink. On this message, you can simply do not respond if you are printing in normal mode. However, some versions are equipped with special sensors that signal the re-use of a single element. In such a case, the system produces an error, and printing is not performed.

Many users decide to "flash" the device. In fact, the essence of this process is to change the settings and parameters of operation of the printer to access the refill cartridges. This method allows you to fool your computer protected.

Important! Some models have an additional set of chips to a few times to use them. However, the kit is limited to 3 sensors, have to buy a new cartridge after use.

How to flash the printer: instruction

In order to properly perform the firmware, you must understand the principle of operation of the equipment. In general, this process will not be easy and requires no special skills. However, in many respects the correct execution of manipulation depends on the specific version of the device used. To quickly navigate and choose the appropriate option, we recommend using one of the following methods: "firmware":

1. The most easy and simple way is to remove the chip from the body. With the help of mechanical action, remove the special sensor. If necessary, replace it with a new one that comes in the kit.
2. A more sophisticated version is the firmware via the computer system. Initially have to install a program for sewing equipment. Download it from the Internet, using only official website. After installing the app, check for viruses. Then, connect the printer to the computer (off-line). From the "File" section, open the firmware to load it into the printer system. After a full load "stitched" print version of the system file.

The choice of method depends on the type of protection, inspect the case, read the instructions and operating instructions for identifying blocking method.

Many users believe that the service centers are not involved in such matters. However, you can seek help from professionals. If you doubt their abilities, or do not have enough experience in dealing with the technique, try to ask about the possibility of setting the printer's operation in the service center. For a fee, the professionals will help to solve this problem, and you can use for printing refilled cartridges.