How to glue oilcloth on oilcloth: simple tips

Oilcloth is a versatile material that protects surfaces from the harmful effects of moisture, and also makes it possible to quickly remove stains that have arisen. Often, apartment owners need to glue the material onto the existing oilcloth covering. They do this to update the deteriorated or apply the vending coating.

Can oilcloth be glued to oilcloth?

Often, such a design is used for the kitchen - some even decorate the walls with rubberized material. It is eco-friendly and makes cleaning much easier. Sticking oilcloth on the dining table is more often used. It is designed to ensure cleanliness in the house and facilitate the tasks of the hostess.

In the bathroom, it is pasted over the walls around the shower stall. Water does not get on the plastered surfaces, keeping the renovation intact.

In order for the coating to serve for a long time, it is required to carefully observe the principles of competent wall preparation. This also applies to planes that were previously covered with glued material.

How to glue oilcloth on oilcloth?

To begin with, it is important to determine the characteristics of the adhesive composition and measure out a sufficient amount of coating. You will also need a cutter, a knife, sharp scissors, a pen or pencil, and a ruler for work. A spatula and an industrial hair dryer will not be superfluous.

Next, we proceed in accordance with the step-by-step guide:

1. Surface preparation. For walls and tables already covered with a rubberized tablecloth, we recommend rinsing well with a soda solution to degrease and remove dirt. Be sure to dry the installation site. If the old coating is badly deformed or cracked, it is better to remove it altogether.
2. The choice of an adhesive base. PVC or Bustilat is selected. They are mixed with water and used while the substance is fresh.
3. The prepared composition is applied with a roller to the back of the oilcloth. Apply to the surface and press, smoothing from the center to the edges.
4. If bubbles develop, they are carefully cut and re-glued, releasing air.
5. If you are making a wall in a room, each element is glued with an overlap to preserve the pattern.

In this process, the most important thing is to carefully prepare the foundation. Clean it from dirt and dust, degrease and dry it from the effects of various compounds and liquids.