The mistake of many housewives is the lack of care for the washing machine's rubber band

Have you been cleaning the gum in your washing machine for a long time? Yes, yes, the one in the drum. To be honest, I often forget about her. Or rather, I forgot. Until the moment I met the master from the service. He did not so much reproach me for my forgetfulness as showed the other side of the matter. It turns out that he more than once encountered repairs that could have been avoided if the hostesses more often performed simple manipulations that are extremely important for the sealant. In fact, I appreciate my washing machine, so I solemnly promised (both to her and to myself) that now I will take care of it constantly and efficiently. How to do it correctly, I now know. I will not hide, you too can find out everything.

Why the seal requires special attention

All parts of the machine need periodic cleaning and care. Sealing rubber is no exception. The fact is that it is constantly maintained here.

high humidity due to direct contact with water. In addition, if you "slightly open" this casing, you will surely find garbage there. Not the best place to store any dirt, you know!

Important! Debris accumulated under the rubber band can lead to mold, rotting and unpleasant odors in the body of the machine.

In general, there is no choice: cleaning is mandatory! But this must be done correctly. Will learn!

How to clean the seal

Before you start cleaning the sealing gum, it is worth preparing the necessary tools.

• An excellent option would be to use baking soda. It not only cleans parts, but also removes stubborn dirt and mold.
• Various antibacterial and disinfectants. They can be found among household chemicals and can be used for toilet or bathroom cleaning. Any type of cleaning agent with antibacterial additives suitable for fighting mold in a rubber cuff. You can even get by with the usual laundry soap.
• Another option is to use copper sulfate. While copper's primary use is in plant pest control, it also tackles dirt and fungal colonies on the walls of the washing machine.
• You can use the tools at hand that can be found in the kitchen. For example, process vinegar, soda, peroxide, citric or boric acid.

Important! Be careful with aggressive agents that corrode rubber parts. Make sure the agent you choose is suitable for interacting with the rubber.

How to choose a product taking into account pollution

• For removing stubborn stains and plaque should be applied baking sodamoistened with water. It will help to easily get rid of dirt and will not damage the structural elements.
• If the body has formed under the seal plaque and scale from prolonged use, you can apply citric acid or anti-lime tablets. They will dissolve limescale in the sealing casing.
• To remove rust perfect fit acetone or special nail polish remover. Apply it thoroughly to problem areas of the washing machine.
• To cope with an unpleasant odor inside the washing machine, should be poured into the drum eucalyptus or lavender essential oil. You can also use the usual whiteness or lemon juice. Persistent fragrances will eliminate mold and mildew odors.

How to clean properly

But choosing the right product is only half the battle. The main thing is to perform the procedure correctly so that both the result is achieved and the technique is not damaged.

Follow this algorithm, then you will succeed.

Work order

• Use a rubber gloved hand to push back the cuff. Try to turn it out so that the inside is on the outside. From the folds between the elastic remove debris, visible areas of mold and plaque.
• Apply a disinfectant cleaner to the sponge. Wipe down all elements of the cuff.
• Close the door and leave for a few hoursfor the cleaning agents to take effect.
• Place the washing machine on longest wash cycle. So all elements are thoroughly washed from dirt and fungal colonies.
• Hot water rinse all items.
• Dry the parts with a dry cloth.
• Leave the door open to allow the machine to dry completely.

Attention! Sometimes fungi form large colonies and eat away at structural details. In severe cases, the O-ring must be removed or replaced before cleaning.

Preventive procedures

Once you've gotten rid of the stubborn dirt, it is worth considering preventive measures to prevent the reoccurrence of mold:

• After every wash open the door and dry all parts thoroughly construction with a dry cloth.
• Clean thoroughly once a month washing machine.
• Remember to remove large particles of debris and residual dirt.
• Before loading things check pockets carefully for unnecessary itemswhich can get stuck in the sealing gum.
• Provide the clipper with a level surface. Then all the water from the drum is removed through the hose and does not stay inside.

As you can see, nothing complicated. And as a thank you for the extra work, we get a washing machine that does the job without any problems.