DIY lighting plasterboard ceiling, instructions

Light plays an important role in home decoration. Premises with a well-designed lighting system look different, revealing the advantageous sides of the interior. A plasterboard ceiling with interesting lighting fits well with different designs. Moreover, it is easy to make it if you have the necessary tools at hand and basic finishing skills.

DIY plasterboard ceiling: step by step instructions

Lighting can be ordinary, representing a single-color light around the perimeter of the room, and combined. The second option shimmers in different colors, adjusts the brightness.

The zoning technique using different categories of light is very popular. A large room is divided into several functional areas.

Wireframe creation

To make the base for the light source, you need UD guides. They are attached to the wall or ceiling, as well as in the middle of the structure, if necessary. In addition, you will need a CD profile of increased rigidity: it is used to make strong structural struts.

The ceiling with LED strip is not necessarily geometrically correct.

The design may well be curved, but this is more difficult to implement. Competent bending of profiles and guides will help. The tape is laid inside the frame from the free side. Thus, by installing or removing the side, they adjust the angle of light.

Installation of a box for illumination

When the frame is assembled, it is put in place. At a designated distance from the ceiling, fastening of the structure holding the tape begins. The work is carried out by means of a profile of increased rigidity and self-tapping screws.

Thus, having made strong racks, the main rails are attached to them. An LED strip will be placed on them.

Remember: for the light to be bright, the distance between the side and the surface must be at least 5 cm. Otherwise, it will become dull.

Plasterboard ceiling sheathing

The procedure is standard. Difficulties sometimes arise when modeling corners and rounds. Initially, the panel is fastened by screwing it with self-tapping screws to create a deployed corner joint. If the design assumes rounded edges of the backlight, square panels are screwed onto it. Then, smoothly rotating along the axis, carefully cut them around the perimeter. After that, it must be securely fixed with additional self-tapping screws.

Installation and connection of the backlight

At this stage, if the use of an LED strip is meant, it must be fixed. This is due to the fact that later it will be much more difficult to place it inside the box.

It is enough to stick it at a certain height from the profile. When the backlight is fixed, you need to start installing the outer rim. It is necessary to hide the entire structure of the box. On rounded sections, in order to achieve a given shape from drywall, it is necessary to break it evenly every 5 cm.

Design features for different rooms

In the end, it remains to putty the ceiling and cover it with a finishing compound. Depending on the type of room, the type of lighting is selected differently. In the kitchen, geometrically correct diodes placed around the perimeter are appropriate.

In the bedroom, the best solution would be to make curved, intricate lines. This will create a suitable atmosphere for relaxation. The colors are also selected soft, in some cases combined illumination is used.

With a ceiling LED strip, no main lighting is needed. But its installation does not prohibit the use of the chandelier. In addition, it creates a cozy atmosphere that helps to relax.