Bottom valve into the mixer, its pros and cons

click fraud protection

In contrast to the Russian citizens, Europeans are more thorough approach to the issue of saving resources. They manifest miracles of ingenuity when it comes to water consumption. For example, a foot valve should we thank the residents of the UK. This product is extremely simple construction and at the same time - easy and convenient to use.

Despite the fact that the product is more common among people in Europe, our people have appreciated his ability. However, the valve does not cause problems, it is necessary to thoroughly understand its structure, as well as to learn about the advantages and disadvantages.

Bottom valve in the mixer: what it means

Bottom valve - miniature locking element which is mounted in the downcomer opening the shell in order to gain the necessary amount of water. His appearance was due to the fact that in some European countries there are no familiar to us faucets, and water comes from two separate valves. To mix the water and to give it the desired temperature, the British invented bottom valve.

instagram viewer
Mixer with pop-up waste.

Since we have a standard mixers, valves found another use. Most often it is used when it is necessary to wash small items by hand, shave or wash. When using it, there is no need to recruit a basin or pouring water to waste. It is only necessary to omit the shutoff valve, and after a few seconds a sink filled with water.

types of construction

The content of the article

  • types of construction
  • Pros and cons of bottom valve
  • Criterias of choice

Depending on the design of species secrete two devices:

  1. With mixer. At the bottom valve is included in a standard mixer. For the installation of the structures necessary to used plumbing it had the technical ability. Controlled device by a small lever which is positioned immediately behind the mixer or close to it.Basin mixer with pop-up waste.
  2. Push open. Sold separately from the mixer, so it is not particularly popular among consumers. Usually buy them in the event that the old lock mechanism has failed and needs to be replaced, and the mixer is retained performance.Bottom Valves Push open.

Adaptations are unlikely to receive widespread in the former Soviet Union, though some models of faucets had their complete. Consumers are quickly appreciated the benefits and ease of use, and now shut-off valves can be found in many homes.

Reference. One of the indisputable advantages of the product - no need to change the plumbing design.

Moreover, the valves can be both with overflow, and without it. Externally, the difference is noticeable. Significant differences lurk in their functions - models with overflow safer: in case of emergency excess water will fall into the sewer and not spill over onto the floor. If there is no overflow, even the negligence or carelessness can result in serious consequences.

Standard features include:

  1. Bung. That she closes the drain hole.
  2. Arm or spoke. With their help, the cork is propelled - falls or rises.
  3. Kernel. It is necessary to connect the valve and lever.
  4. Thread for attachment to a siphon.
  5. Siphon. The fully assembled device is a complete system for controlling the draining.Bottom valve with mixer.

Push open devices have several different design. To open the valve, it is necessary to click on it. Push open It has a simple design, but using it is not so convenient - to press the valve, immerse the arm into the water. This is particularly unpleasant if the sink before it washed the dirty clothes.

The advantage of these models is the attractive appearance. Small design, located on the bottom of the sink, looks much more aesthetic than a model with a lever.

Reference. Many models Push open have an attractive appearance, as to make them use a brass or bronze.

Pros and cons of bottom valve

Stable high demand and a lot of positive reviews due to a number of advantages that has a bottom valve. These include:

  1. Economy. Rising prices for public services has forced many to revise their approach to the waste of resources. The cost of the design varies from 500 to 2000 rubles. This low price, which is to be compensated by a decrease in accounts for water.
  2. Easy to use. All the control valve is reduced to clicking on it with one finger. To raise or lower the unit does not need to exert much effort. Therefore, even small children will cope with it.
  3. Ergonomic design. The simplicity of the device makes it easy to clean it from dirt. Furthermore, the valve coated with a special coating, which prevents the accumulation of dirt. Therefore, to clean it does not require the use of special detergents.
  4. Attractive appearance. Gentle ceramic or metal plug look much more aesthetic than the drain hole.
  5. Hygiene. The plug prevents the penetration of the unpleasant smells of sewage.
  6. Easy installation. Simplicity of design allows you to install it without the involvement of professionals.Easy to install the bottom valve.

Serious deficiencies in the product no. However, it is necessary to consider some nuances:

  1. If you use should be carefully monitored for hygiene. To this end, the shell and the valve should be cleaned regularly.
  2. If you choose not equipped with overflow, make sure the water level in the sink. Otherwise the water will fill it entirely, and will pour on the floor.
  3. Another irritant using models Push Open is the need to put their hands into the dirty water. Minus lever options - inconvenient cleaning elements arranged for the mixer and a plumbing.

Criterias of choice

Before buying, it is first necessary to determine the cost, because it is essential to know what you are getting for your money. This setting affects the quality of materials and workmanship, the presence of additional features and design.

In addition, guided by the shell structure. If it is not possible to drain the excess water, the suitable device without overflow. Alternatively, you can replace the siphon on the more practical model.

If you plan to frequently wash in the sink, it is best to opt for a pen device. Then you do not have to give up in dirty or hot water.

Bottom valve in the mixer can become both an indispensable tool, and bring trouble, if quickly come into disrepair. Therefore, the choice is not worth saving, and it is better to buy a stylish high-quality product that will last for several years.

How to paint a bath: the advantages and disadvantages of painting an old bath with your own hands

How to paint a bath: the advantages and disadvantages of painting an old bath with your own handsBath

No matter how we try to carefully handle the bathroom, but over time, chips and small cracks begin to appear on a snow-white surface, the coating turns yellow. Traces of rust appear. In order to r...

Read More
How to clean a bath at home if it is clogged: why blockages appear

How to clean a bath at home if it is clogged: why blockages appearBath

If you have a bathtub at home, and many have it, then most likely you already know one of her “cute” habits. They really like to clog baths. However, shells sin no less. And, most importantly, at ...

Read More
Making remnants useful for everyday use

Making remnants useful for everyday useBath

Where do you use remnants? They always remain! Well, we can’t grind soap without any residues. Therefore, the question: "What to do with remnants?" Sooner or later, she faces each mistress. It tur...

Read More
Instagram story viewer