Have you started repairs in the kitchen and wondered how to move the gas meter so that it does not spoil the interior of the room? Or is the data transmitted by the flow meter difficult to read due to the inaccessibility of the device? This, as well as the requirements for the location of gas equipment, may cause the transfer and introduction of changes to the existing project.
There are a lot of rules for dismantling and installation. All of them are approved by law and are accompanied by instructions on who has the right to perform work, what documents are needed, what algorithm should be followed when changing the position counter.
In order not to search for information on disparate sources, we suggest that you familiarize yourself with our article. In it, we have collected information about the requirements of the law, precautions, the correct procedure for moving the flow meter.
The content of the article:
- Possible reasons for transfer
- Rules for choosing a place for a counter
- The main stages of preparation
-
Work order
- Installing a new device when carrying
- Acceptance, accompanying documents
- Placement of the filling after transfer
- Conclusions and useful video on the topic
Possible reasons for transfer
The most common motive is the beginning of renovation in the kitchen, when a new fashionable set replaces the old cabinets.
In this case, the initiator of the displacement of the apparatus is the owner of the house or apartment. He can also start the process when changing the stove, gas equipment, buying new heating devices or a higher refrigerator.
When planning the purchase of a new kitchen unit, it is worthwhile to determine in advance the place for the counter. In this case, it is necessary to take into account the requirements of SNiP 42-01-2002, where the rules for the location of the device are given. The correct approach is a preliminary consultation with a gasman
But this is not the only possible option. Request to transfer gas flow meter a gas service employee who notices a violation of the placement rules may be in the kitchen. In this case, he will draw up a suitable scheme and determine the timing of the work.
Rules for choosing a place for a counter
The main criteria for choosing a site are safe operation and ease of maintenance.
If you look into Rule 42-101-2003, you can find requirements such as:
- observance of the meter distance from the meter to the batteries;
- location of the device at a height of 0.5 to 1.6 meters from the floor, 40 cm from the surface of the plate;
- placing it 4-5 centimeters from the wall;
- remoteness from sinks, other sources of high humidity.
And most importantly, the gas meter must be visible. Access for reading indicators and control examinations must be freed.
The location of the meter in the apartment is more standardized than when operating in the private sector. When moving a gas meter in a private house, you often have to use an individual approach.
When contacting the gas service, the owner of a residential building must submit an existing gasification project. The document is created at the stage of connecting the household to the gas pipeline
The device can be taken out into the street, outside the gasified premises. Or located in a new, completed building. In such cases, it is necessary to be guided by the rules for the design of gas distribution systems.
They state that:
- removal of the device outside the premises should be accompanied by a canopy, a metal cabinet that provides sufficient ventilation;
- the device cannot be located closer than 50 cm to window and door openings;
- external openings in the walls of the house are not suitable for installing a flow meter, as they contribute to the accumulation of fuel in the event of a leak.
Installation of a gas flow meter on open, free-standing supports is permissible if the ambient temperature does not exceed 60 degrees above zero and falls below -20.
In disputable situations, the priority is given to the meter placement rules specified in its technical passport.
The main stages of preparation
Despite the fact that the actions of gas services are regulated by law, the procedure for applying and submitting applications for the transfer of the meter may differ.
You can find the address and contact phone number of the regional gas service on the receipt, which is sent monthly to residents for payment. Usually this information is located at the bottom of the sheet.
Therefore, the first step in preparation should be a call to the organization serving the area of residence. Its representatives will tell you where to get the application form and which department to contact.
If the changes affect the general gas supply plan for an apartment building, then not only will it be necessary to clarify the possibility of transferring, but also a separate agreement. This is done by gas service engineers. They also make up the schemes that meet the safety requirements.
The next step is preparing the documents. So, the standard kit includes:
- Applicant's passport.
- A completed application form indicating the reasons for transferring the meter.
- Certificate of ownership.
- Written consent of all owners.
- Technical passport of the device, act of the last verification.
Some services additionally require confirmation of payment for the services of the gas supplying organization, as well as copies of all provided documents.
If a new device is installed during the transfer, then it is necessary to agree on its type and brand with the gas service. A professional opinion does not hurt here either, since counters are right and left, have different bandwidth.
The final stage of preparation is payment of services for dismantling the device and its transfer. The owner is given an estimate, which indicates the cost of work, the name, quantity and price of consumables. At the same time, the date of the visit is agreed.
Work order
Professional teams spend on transferring or installation of a gas meter in the apartment no more than an hour. The first step in the house is to turn off the gas supply. This is done in agreement with the local utilities, with the warning of the rest of the residents.
Further actions proceed as follows:
- With the help of gas welding, the device is removed.
- Held transfer of gas pipes in accordance with the new scheme.
- The device is installed in a new place.
At the end of the work, representatives of the gas service must check the tightness of the connections. To do this, gas is started up through the riser, and soap foam is applied to the joints.
The absence of bubbles indicates that the compounds are safe. Appearance signals a leak. In this case, the gas is shut off, the seams are boiled again.
For the visit of gas workers, it is necessary to prepare a workspace: ensure the availability of gas equipment and pipes, move the curtains, remove kitchen utensils, foreign objects
Flange connections are retightened. Simultaneously with the monitoring of leaks, the operability of the device is checked.
Installing a new device when carrying
The execution of work on the transfer of the flow meter can be combined with device replacement for a new one. This is beneficial when:
- nearing completion the service life of the old meter;
- the desire to install a modern device with remote data transmission;
- absence of documents confirming the positive outcome of the last verification.
Handing over an old device for verification, you will have to spend time waiting for the provision of the service and the funds to pay for it.
If the equipment is found to be unusable, the costs will increase: it will be necessary to purchase a new meter. Therefore, in some cases, when transferring, it is more profitable to plan the installation of a new device.
Acceptance, accompanying documents
Being present during the work, the owner can check the correct installation and compliance of the new arrangement of pipes and the meter with the approved scheme. If everything is done correctly, the foremen must fill out the certificate of completion.
It indicates:
- information about the gas distribution organization that issued the permit and sent its representatives;
- information about the employees who completed the work;
- technical data of the meter, its serial number.
The second required document is the act of putting the device into operation. The date and time of launch must be recorded in it, the operability of the device must be confirmed.
When applying for the transfer of the meter, ask the gas company if it is possible to seal the device immediately after installation. Some organizations present this possibility. In others, a separate application must be submitted after completion of installation work.
Both acts are drawn up in duplicate. The owner of the premises must keep his copies together with the technical passport of the product.
Placement of the filling after transfer
After you managed to move the gas meter in the kitchen, you need to seal it. To do this, you need to fill out an application and take it to the customer service department.
At the time of application, the following documents will be required:
- Applicant's passport, certificate of ownership.
- Technical data sheet of the product or its copy.
- Acts drawn up by the masters of the gas company during the transfer.
The time allotted for installation of a seal, is 5 days. During this time, the company is obliged to agree and determine the date of the specialist's visit, perform the work, and prepare a service agreement.
After transferring the meter and sealing it, it is necessary to record the readings. The data must be documented. This rule applies to both new devices and already used ones.
Calculation of payment by the meter is carried out from the day following the date of sealing. Until then, when calculating costs, the consumer should be guided by regional and seasonal regulations.
Conclusions and useful video on the topic
In the video below, the employees of the gas company once again remind that before buying a kitchen set, it is necessary to clarify the possibility of transferring the meter, to obtain official consent:
If you are going to move the gas meter, you need to get full advice from a professional gas operator. An independent search for options may result in non-compliance with the rules and non-receipt of approval.
The work must be performed by certified specialists using tools, welding machines that have a permit. All controversial issues should be resolved based on SNiP 42-01-2002, SP 42-101-2003.
If you have to repair the kitchen or you doubt the correctness of determining the location for the gas flow meter, ask questions, exchange opinions. The form below allows you not only to create text messages, but also attach diagrams, sketches, drawings. Start a dialogue, become the initiator of the discussion!
