Content
- 1 Response speed
- 2 Safety of use
- 3 Exploitation
- 4 Cost
While arranging the lighting in his house, everyone thinks about which sources of light to use. Most often, the choice is between LED and energy-saving lamps, each of these types has its own advantages. In order to make the choice as correct as possible, it is important to compare not only their main characteristics, but also the degree of efficiency and safety of use.
Response speed
First of all, it’s worthwhile to understand that people mean fluorescent incandescent lamps by “energy-saving”. When you turn on the lamp in which the fluorescent lamp is installed, it turns on at full power only gradually. That is, at first the light will seem very dim, which is not always convenient.
Unlike energy-saving, LED lamps can be dimmed. Using a special device, you can set the most optimal and convenient level of illumination for yourself.
Safety of use
It should be noted right away that there are no harmful chemical compounds in LED lamps. While in the bulb of energy-saving lamps there are mercury vapors. And if just the operation of such lamps does not cause any harm, then this cannot be argued if the glass is damaged by for some reason, in this case it is important to immediately take a series of measures to protect your home from the effects of traces mercury. In many respects, this is why it is important to properly dispose of energy-saving lamps, it is simply impossible to dispose of it in household waste. LED lamps do not cause any harm, including regardless of the degree of damage.
Exploitation
During their work, energy-saving lamps heat up to 60 degrees, but gradually, as the main parts wear, the heating temperature begins to increase. In turn, LED models always heat up to the same temperature, regardless of the time they are used. In fact, this means that they will be safe for any premises.
Cost
If we take into account exactly the average cost in the market, then LED and energy-saving lamps have about the same price, of course, a lot will depend on the manufacturer and place of sale.
-
When an adjustable floor is more profitable than a capital screed
-
What mistakes are made when the radiator is connected diagonally?
-
What are the consequences of building a site without permission?
-
What errors lead to water hammer in the heating system and how to avoid them
-
Why does the grinder work, but the disk does not spin
-
What could cause the cabinet door to bend
-
5 reasons to change the wizard without waiting for the repair to finish
-
How to cut tiles without dust
-
How to cut a fiberboard with a flat edge with a regular grinder
-
Why you should not put aluminum radiators on central heating
-
Why you can not allow for flaws in the installation of roof nodes from corrugated board
-
What boards can not be used for half-timbered
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
