Pipe routing work is recommended to be entrusted to professionals, since there is a high probability errors that subsequently lead to malfunctions in the functioning of the heating system.
The heating system is a closed circuit, it is very important to develop the installation scheme in advance before starting work, at this stage no mistakes should be made. In most cases, with the independent performance of work, the following errors are possible:
- Use of unsuitable pipes - for example, if you use pipes for a heating system that completely unsuitable for this, it threatens with regular accidents and a significant reduction in life operation. For the installation of the heating system, copper pipes, anti-diffusion pipes made of plastic, and also welded pipes made of steel can be used. Any pipes that are used in the heating system must have a supporting document of conformity.
- The pipe diameter mismatch with the one described in the project. With a smaller pipe diameter, hydraulic pressure increases. With a larger diameter, the inertia of the system increases, and energy consumption also increases, which contributes to the occurrence of an imbalance in the system. The pipe sections must necessarily correspond to the dimensions that are prescribed in the project.
- Pipes from different materials. It should be borne in mind that not every material from which pipes are made is compatible with each other. Incompatibility is manifested not only in physical properties, but also in chemical ones. This is due to the fact that each material has its own coefficient of thermal expansion. For example, pipes made of aluminum and copper cannot be used together, since a reaction will occur at their junction that significantly accelerates aluminum corrosion. If it is not possible to use pipes of only one material, then it is necessary to use special dielectric gaskets and add water as the main coolant. This will slow down the corrosion but not eliminate it completely.
When wiring pipes, it is recommended to avoid laying them through dilatation gaps, and if this cannot be prevented, then it is necessary to lay pipes through protective sleeves. It is also worth considering that if the installation is carried out under the floor of plastic pipes, then the mounted area must be made in one piece.
-
Interior design in fusion style
-
Fashionable tile under a decorative stone
-
How to choose wallpaper for the bathroom?
-
Why bad frame houses
-
Why is it important to maintain the required humidity level when painting?
-
What is bad liquid wallpaper, as well as their advantages
-
Common causes of floods of neighbors
-
What to do if the radiators are too hot
-
how to arrange the lighting in the kitchen
-
The main types of artificial stones
-
Built-in dishwashers
-
Blowing from a wooden window what to do?
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
