Content
- 1 Air and heating
- 2 Where does the air come from
- 3 What to do
- 4 Filling heating water
- 5 Air use
Often the air in radiators becomes the cause of the inoperability of the entire heating system in the house, so it is important to learn how to bleed it so that the heat comes into the apartment in a timely manner.

Air and heating
The heating system is based on the circulation of hot water through the pipes, when air enters them, the process is complicated. The result is:
- Noises when moving water. They cause vibration of the pipes and weakening of the welds, which in the worst case can burst;
- Air plugs that paralyze the heating system either locally or extensively;
- Oxidized parts of pipes that corrode. Airing greatly reduces the life of radiators.

Where does the air come from
It seems surprising that air appears in a sealed system, moreover with enviable regularity. There are several reasons for this:
- Incorrect determination and determination of the slope of the pipes during the installation of heating;
- Incorrect filling of the heating system with water;
- Lack of tightness or its violation between the constituent elements of the system;
- Ignoring the installation of special devices that evacuate air;
- Repair work of radiators and heating systems;
- Fresh water in the system, enriched with a lot of air;
- Corrosion of metals from the inside.

What to do
If the heating system is closed with forced circulation, the installation of devices to help get rid of air will help. Their attachment points are the highest pipe points or kinks. Devices are manual and automatic. The first type includes a Maevsky crane, which is mounted on the side of the pipe. During the supply of heat and water, you just need to open the tap and bleed air. Automatic systems allow air-conditioning without human intervention.

Filling heating water
Pipes are filled in the heating season with cold water from the bottom up. All taps, except those that run on the drain, must be loosened. Water gradually squeezes out air, filling should not be carried out quickly. After the water passes through the tap, it is screwed. After full filling, the pump starts.

Air use
Often air jams form in the system used for many years. Usually their appearance coincides with the beginning of the heating season. You must be able to air the system on time in order to avoid emergency situations.

Sequencing:
- The place of the air plug is determined tactile (places with air are colder) or acoustically (water passes with noise);
- Searches for the closest Mayevsky crane;
- The tap opens and at the same time a fresh portion of water is poured into the system.



-
Why is it important to maintain the required humidity level when painting?
-
What is bad liquid wallpaper, as well as their advantages
-
When is it better not to glue paper wallpapers?
-
How to paint from spray can without smudges
-
Where you should not have an electrical panel in a private house
-
What primers are not suitable for application under fiberboard
-
Is it problematic to make the bathroom floor so as not to be afraid to flood the neighbors
-
What is the advantage of a nichrome plexiglas cutter?
-
How to disguise a beautifully gas pipe in the kitchen
-
An easy way to weld cast iron: how to make a secure fit
-
At what height should not hang a TV in the room
-
What cheap wood impregnation is not inferior to expensive
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen