Effective Ways to Reduce Electricity Costs

Content

  • 1 Using energy-saving lamps
  • 2 Turn off the light on time
  • 3 Monitor the state of the art
  • 4 Refresh redecorating
  • 5 Wipe the bulbs
  • 6 Use a two-rate counter
  • 7 Use heat reflectors

Utility bills can be very frustrating at the end of the month. There are numbers in receipts that are not amenable to change, but some indicators can be affected, for example, by electricity. What can be done?

Using energy-saving lamps

The easiest and most effective way to save money is to change bulbs in the house from conventional ones with a heating element to energy-saving ones. Among them there are luminescent and LED. They have several advantages: not as fragile as glass lamps, more durable, do not depend on constant switching.

/

Turn off the light on time

Many neglect a simple rule: leaving the room, do not turn off the light. In total, over the course of a month a lot of superfluous and energetically unjustified Watts are rushing. If the problem with turning off the lights is acute, you need to hang a note on the front door with a reminder. Over time, a habit will develop.

instagram viewer
/

Monitor the state of the art

The constant scale layer on the teapot, it turns out, increases its energy consumption when boiling. The fact is that due to salt deposits, thermal indicators increase, reducing the efficiency of the heating elements, and the water boils longer.

/

The refrigerator, if used improperly, also significantly increases energy consumption. If you put the freezers next to the battery, the internal system needs more energy to cool the food.

/

Refresh redecorating

The right colors in the interior reduce electricity consumption. If you make the rooms in white, then about 80% of the rays from artificial light sources will be reflected, and the room will not be so dim. You do not need to buy brighter bulbs, because the interior increases their power.

/

Wipe the bulbs

The brightness of the lighting devices is affected not only by the period of their operation, but also by the settling dust with dirt. Instead of replacing a dim bulb, you can wipe it first. The room is likely to become brighter.

/

Use a two-rate counter

The use of counters at double rates is beneficial for those people who prefer to stay awake at night. Usually, when they are installed from 23 to 7 hours, energy is consumed in half. Such counters reduce the likelihood of emergency blackouts.

/

Use heat reflectors

In winter, half of the electricity spent on additional heaters. For example, special heat-reflecting screens consisting of foamed polyethylene are sold on oil radiators and other heaters. With the help of technology, they achieve a temperature increase in the rooms by several degrees, while the heat does not escape through the walls to the street.

/
/
  • When an adjustable floor is more profitable than a capital screedWhen an adjustable floor is more profitable than a capital screed
  • What mistakes are made when the radiator is connected diagonally?What mistakes are made when the radiator is connected diagonally?
  • What are the consequences of building a site without permission?What are the consequences of building a site without permission?
  • What errors lead to water hammer in the heating system and how to avoid themWhat errors lead to water hammer in the heating system and how to avoid them
  • Why does the grinder work, but the disk does not spinWhy does the grinder work, but the disk does not spin
  • What could cause the cabinet door to bendWhat could cause the cabinet door to bend
  • 5 reasons to change the wizard without waiting for the repair to finish5 reasons to change the wizard without waiting for the repair to finish
  • How to cut tiles without dustHow to cut tiles without dust
  • How to cut a fiberboard with a flat edge with a regular grinderHow to cut a fiberboard with a flat edge with a regular grinder
  • Why you should not put aluminum radiators on central heatingWhy you should not put aluminum radiators on central heating
  • Why you can not allow for flaws in the installation of roof nodes from corrugated boardWhy you can not allow for flaws in the installation of roof nodes from corrugated board
  • What boards can not be used for half-timberedWhat boards can not be used for half-timbered

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
Hammock in the interior: tips for arranging a relaxation area

Hammock in the interior: tips for arranging a relaxation areaHelpful Hints

Each person needs leisure objects in the house - for someone this is a bed or sofa, but there are very unusual solutions. Hammock - a thing that creates an original design interior in any room. U...

Read More
Hit of the season - modular kitchen furniture

Hit of the season - modular kitchen furnitureHelpful Hints

The greatest demand today is modular furniture. It is supplied for bedrooms, kitchens, living rooms and even hallways. The main advantage of furniture sets is that with their help you can optimall...

Read More
Primers for wood and metal, their characteristics and rules for applying to the surface

Primers for wood and metal, their characteristics and rules for applying to the surfaceHelpful Hints

Content 1 Popular primers 1.1 Soil gf-021 1.2 Primer STRONG 1.3 Aquastop Strong Concentrated Soil 2 Primer for wood 3 Application of a primer for metal The duration of the operational life...

Read More