What mistakes are made when chain pulling a chainsaw, because of which it saws poorly

A chain often flies on chain saws, which greatly complicates the work. The main reasons that distinguish the master: problems with the asterisk, stretching, problems with the tire. What errors lead to this?

Use of low-quality components

A chain in a chainsaw is a part that wears out most quickly and requires timely replacement. In the process of cutting, the metal undergoes deformation, which stretches the chain by about 1 cm. Also, with prolonged use, it becomes dull. Using the old chain on a chainsaw is strictly prohibited.

Loose tire

If the tire in the chainsaw is not sufficiently fixed, this can lead to chain stretching. The casing is bolted, and cover caps are put on the tire and the drive sprocket. When the bolt loosens, this motor unit creates significant vibrations that adversely affect the tensioned chain. To eliminate this error, first you need to fix the tire, and then see if the work of the chainsaw has changed.

Unresolved asterisk issues

If the sprocket in the motor assembly is not properly fixed, the chain tension is loosened. To fix it, it is necessary to remove the protective cover from the tire and the spark plug, after which the air filter is pulled out. A stopper is mounted in place of the spark plug, which will fix the piston. Next, you need to scroll the clutch disc clockwise using a special or universal key.

With the help of these manipulations, the piston is set to the extreme position. Through the holes for the candles visually it will be located below. The fixation of the piston ends here, then the sprocket is clamped. To work with a chainsaw, all the elements are assembled in a single design.

How to tension the chain

The chain can be changed at home, both in the household and in the professional model. To correctly install the chain, it is necessary to work with the cooled tool, since the thermal expansion of the metal will not play in favor of the master.

First, the startup lock is turned on. After the grooves and all parts in contact with the chain are thoroughly cleaned. Before tensioning, you must make sure that its mechanism has a sufficient clearance.

Adjustment is carried out using a special tool according to the instructions, since each model of the saw and chain has its own characteristics.