How to get rid of scratches on a glass table

Glass is a soft and fragile material on which scratches of various depths can easily be left. Over time, the surface of the table becomes untidy if mechanical defects propagate over the entire surface. How to remove scratches?

It is said that for minor scratches, there is no better tool than clear nail polish. To work, it is necessary to degrease the surface and spread the varnish with a thin layer, after drying, excess is removed with a varnish remover.

The next good tool is a composition for polishing metal. The product is applied to a soft rag, after which scratches on the table surface are carefully polished. To get the most even coverage, the procedure is repeated several times.

You can use regular toothpaste, but gel and whitening compounds will not work. The paste, like the polishing agent, is applied to a soft cloth and they begin to overwrite the surface with scratches. The action is repeated until the damage disappears. The remaining paste after the procedure is removed.

Minor scratches can be removed with GOI paste. It is heated to a molten state, smeared on a piece of fabric, and then polished places of defects. Everything is done in a circular motion.

Vinegar and mustard are good from home remedies, which are bred in equal proportions and applied to scratches with a rag. After achieving the result, the remainder of the mixture is cleaned with a dry rag.

You can use liquid polish for a car body. It must be applied immediately to scratches or a rag, after the composition is rubbed until a persistent effect appears. Also, before experiments with a glass surface, you can try special products sold in household stores.

Step-by-step instruction

In order not to make mistakes and get the result the first time, it is advisable to use this instruction:

1. To begin with, the surface of the table is slowly rubbed with a dry and rough cloth. At this stage, the glass is cleaned and all defects appear. If the first time does not work, then you can moisten a rag in soapy water.
2. After that, the smallest sandpaper is taken, which cleans the surface of the table. If you take the wrong size, the glass will only deteriorate and there will be more scratches.
3. After that, the prepared GOI paste is taken, which is applied to a piece of felt. The surface is rubbed slowly and in a circular motion. The smoother the rag, the better the final result.