Despite wide progress in all spheres of life, most people in the modern world sooner or later face the problem of the lack of hot water in the tap. The solution to this problem depends mainly on the desire and capabilities of each person. For an uninterrupted supply of hot water, it will be quite enough to purchase and install a flow-type or storage water heater (boiler).
Accumulative water heater is usually called a device, which is a closed tank, inside of which there is a heating element. It is filled with cold water supplied under high pressure. Water heated with the help of a heating element is supplied to the tap. As a rule, installed heaters do not differ in high power, so the process of heating water can take from 30 minutes to 5 hours.
The flow-through version has a heater with a higher power, which allows you to heat water almost instantly. This helps to obtain the required volume of heated liquid almost instantly.
When deciding on a choice, it is very important to take into account the temperature to which the water should be warmed up and how much will be needed. If you choose a storage water heater, the volume of water will be equivalent to the volume of the tank.
The performance of the flow-type device depends on how powerful the heater is installed in it, whether the pressure of the supplied water is high and what its outlet and inlet temperature are. For full heating of water in the winter season, it is necessary that the device power is at least 12 kW.
As for the issue of energy consumption, it is generally accepted that the storage type of water heaters is more economical. Although in this matter there is no unequivocal opinion.
The storage boiler has bulky dimensions and heavy weight. For its installation, it is mandatory to have sufficient space and a solid wall to which the boiler will be attached.
Instantaneous water heater is the exact opposite. It is light, small and can even be mounted on a drywall wall.
In addition, it should be noted that a flow-through boiler is less demanding to maintain and is able to work for more than ten years. The storage device is subject to regular preventative cleaning and replacing the anoid. On average, the service life of such equipment does not exceed 5 years.
-
How to make sewers in a country house: an easy and budget way
-
How to easily round drywall or plywood without incisions
-
Frequent mistakes when warming a house, places where cold seeps
-
Original bench made of wood
-
What does a person spend water most of all
-
The unique properties of seaweed
-
Frequent and dangerous mistakes for working with a grinder for beginners
-
Features of the installation of half-timbered columns
-
The weaknesses of cheap food: how to extend the life
-
Without which tools do not lay tiles
-
Why you can’t save money by installing infrared heating instead of gas
-
The most serious mistakes that are made when leaving a house for the winter without heating
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
