All good housewives strive for cleanliness. Everything around must shine and be in perfect condition. Bath and kitchen are usually given special attention. However, lack of care is not always the cause of yellowing and stains on the surface of the bathroom. Despite the fact that on the modern market they offer a huge number of various cleaning products, it is not always possible to get the desired result with their help. However, you can use very effective and affordable folk options for cleaning enamel.

There are several types of pollution of the bath. It is necessary to identify the problem in order to select the most effective option for its solution. Yellow spots are a frequent pollution of the bathroom. Their most ordinary tap water causes them. Alas, the liquid flowing from the tap contains a lot of heavy metals and other harmful impurities that can have a negative effect on plumbing. Traces of rust form due to old water pipes or the presence of iron in the water. Limescale - due to magnesium and calcium, salts of which are also present in tap water.

Rust and limescale from the surface of the bathtub can be easily removed with special factory products as well as vinegar and soda. However, the substances are very aggressive, so work should be carried out with gloves.

Soda is a universal remedy that in many cases can come to the rescue in the struggle for a clean bathroom. All types of pollution can give up when it is exposed. Soda should be used only in baking, as it gives the enamel shine and makes it snow-white. Soda does not have a sharp odor; with high efficiency, the skin does not irritate. The nuances are only in what degree of damage should be eliminated with its help.

If the dirt in the bathroom is not significant, you can rub the soda over the entire surface with a sponge. Particular attention should be paid to contaminated sites. Then they leave everything as it is for about one hour. After that, it remains only to rinse with soda gruel with warm water. For permanent care, this option can be used without any concern. The whiteness of the enamel in this case will persist for a long time.

Old spots are removed with soda and ammonia. Ammonia in this case will help to achieve the desired effect. On the surface of the bath you need to apply a viscous mass created by mixing the two components. Rinse off the product after ten to thirty minutes. It all depends on how strong and extensive the pollution is. The bath after such processing is literally unrecognizable.

-
For what devices people did not conduct wiring, and then very much regretted
-
Where you should not put a washing machine in the bathroom
-
Why was ash added to the mortar in masonry before
-
Smart sockets: why call a coffee maker or kettle
-
Frequent and dangerous mistakes for working with a grinder for beginners
-
What types of screws are best not to use
-
What can happen if you do not have grounding in the apartment
-
New bill: how much do you have to pay for electricity
-
The weaknesses of cheap food: how to extend the life
-
Is it possible to restore a damaged foundation
-
Is it profitable to turn off the power supply and switch to your
-
What you will face if you combine a balcony with a room
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen