Many owners of home stoves are unaware that using some simple methods can significantly increase the efficiency of their devices.
Almost all heating projects are deprived of the opportunity to increase the efficiency by methods that are not traditional. It all comes down to increasing the number of revolutions or configurations of the furnace device. Consider what is the efficiency of the furnace and what measures need to be taken for its growth.
Coefficient of performance (COP) is the degree of efficiency of a mechanism whose task is to give energy or convert it. In the context of the furnace, efficiency is realized by the level of the ratio of the volume of heat transferred to that contained in the used fuel.
How to increase productivity?
Most methods of increasing the productivity of furnaces are based on reducing heat losses in the room space. First of all, it makes sense to increase the productivity of the furnace by changing the type of blowing.
If the furnace is the main source of heat in the room, then often, within half an hour of burning fuel, the room temperature rapidly decreases by a couple of degrees. This is due to the open view and the weathering of barely heated air. To eliminate such a disadvantage, you can use an elementary device.
The blower is equipped with an additional iron tube with a mounted damper. That it will become a fence for warmed air, allowing it to move not out of the room, but inside it.
Using hot gas temperatures will also help to significantly increase the efficiency of the furnace. The method involves equipping the chimney with an additional pipe at a slight slope, the diameter of which does not exceed 300 mm. A simple upgrade can increase the room warming rate by 25%. Due to the high heat transfer properties of the metal, the heated air does not rise upward, but lingers inside, heating the room.
The described options can significantly increase the productivity of the furnace, while reducing the necessary time for heating the air, as well as save a significant amount of fuel. Both methods are easiest to use even at the stage of laying the furnace. Installation of additional equipment is so simple that the procedures are available for the finished construction.
-
Why are Americans used to cooking only in the microwave?
-
Common ways to cheat on a sawmill
-
Will storage heaters help reduce electricity consumption?
-
How not to hang a shelf on a drywall
-
Top beautiful interior doors
-
Water consumption rates per person
-
How to make sewers in a country house: an easy and budget way
-
What mistakes do beginners make when working with foam
-
Why underfloor heating greatly increases electricity costs
-
What boards can not be used for half-timbered
-
How can you save on heating in a private house
-
What is the danger of an extension socket built into the wall?
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
