Mistakes when growing a lawn. What do you need to know?

Content

  • 1 Seat selection
  • 2 Grass selection
  • 3 Fertilizer selection
  • 4 Wrong watering
  • 5 Haircut mode
  • 6 Preparing for the new season

Bright and green lawn in the garden or in the country? Many do not see any problems in caring for him. His weed and pests do not need to be sprayed. Only watering and cutting. Only such an attitude can lead to the fact that the lawn will be very different from those that are on beautiful photos on the Internet.

The main mistakes that beginner gardeners make when creating a lawn are almost always the same. They need to be known and not allowed.

/

Seat selection

The place under the lawn must be selected based on its parameters. For example, in the shade it is better to sow a universal lawn from shade-loving plants. But the Moorish or ground grass like well-lit places.

Grass selection

A mixture of grass for the lawn is selected in accordance with the climate and soil conditions on the site. You should not plant a sports lawn with a grass mixture for a sports one. They differ in a set of cereals and proportions.

instagram viewer
/

Fertilizer selection

Usually universal fertilizers are enough for feeding. But in some cases, one element is missing. There may be more need for sodium or phosphorus. The grass is not so bright and juicy. So, it’s worth determining what is missing and additionally feeding.

/

Wrong watering

Young lawn should be watered daily in small portions. But adult grass is a different mode. It should be slightly sprayed once every two days, and watered abundantly 1-2 times a week. In extreme heat you need to water more often. But this must be done in the morning or in the evening, in order to prevent sunburn.

/

Haircut mode

You should always start mowing the lawn when it is still young. Mowing grass enhances its drought tolerance, allows you to build more green mass closer to the ground. But you can’t even mow the lawn. Above ground should be 3-5 cm of grass. And grasses such as fescue and ryegrass mow at a height of 5-6 cm. You need to mow the lawn at least once every two weeks. After cutting, it is important to water it. Depending on the weather, the last haircut should be in late September - early October. Tall grass should not be left for the winter. Change of frosts with thaws leads to the fact that the lawn begins to spree.

/

Preparing for the new season

It is not enough just to mow the lawn and fertilize with fertilizers in the fall. You also need to protect the lawn from getting wet, clean it of accumulated debris, check the operation of the water drainage system and conduct aeration. If this is not done, then in the spring instead of the lawn you will get a plot with pale yellow grass and bare spots.

/

Following these simple tips will help to grow an ideal lawn on your site that will delight the eye with lush greenery all summer.

  • When an adjustable floor is more profitable than a capital screedWhen an adjustable floor is more profitable than a capital screed
  • What mistakes are made when the radiator is connected diagonally?What mistakes are made when the radiator is connected diagonally?
  • What are the consequences of building a site without permission?What are the consequences of building a site without permission?
  • What errors lead to water hammer in the heating system and how to avoid themWhat errors lead to water hammer in the heating system and how to avoid them
  • Why does the grinder work, but the disk does not spinWhy does the grinder work, but the disk does not spin
  • What could cause the cabinet door to bendWhat could cause the cabinet door to bend
  • 5 reasons to change the wizard without waiting for the repair to finish5 reasons to change the wizard without waiting for the repair to finish
  • How to cut tiles without dustHow to cut tiles without dust
  • How to cut a fiberboard with a flat edge with a regular grinderHow to cut a fiberboard with a flat edge with a regular grinder
  • Why you should not put aluminum radiators on central heatingWhy you should not put aluminum radiators on central heating
  • Why you can not allow for flaws in the installation of roof nodes from corrugated boardWhy you can not allow for flaws in the installation of roof nodes from corrugated board
  • What boards can not be used for half-timberedWhat boards can not be used for half-timbered

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/

Professional Services in opening doors in MoscowHelpful Hints

Content1 Causes damage to the castle2 Emergency opening of doors3 How to order a master emergency opening4 Why choose usBroken locks, ingestion of foreign objects leads to a problem with opening th...

Read More
How to make a solution for durable concrete

How to make a solution for durable concreteHelpful Hints

To prepare high quality reliable solution for the concrete layer with sufficient strength characteristics, must be properly make mixture for the analogous starting component. It is extremely import...

Read More
5 Reasons Why burn outlet

5 Reasons Why burn outletHelpful Hints

Content1 Causes of fire receptacles1.1 Overload1.2 Poor contact with the wiring1.3 Problems with socket contacts1.4 Inconsistency outlet1.5 Burnout plate clampsCases of fire receptacles are not unc...

Read More