Why you should not make built-in air conditioning: pitfalls

Recently, the fashion for built-in appliances has spread to almost all home units. Now there is a very large selection of any equipment that will significantly save space. Any built-in appliances fit more harmoniously into the interior than usual. However, it is worth meticulously assessing the capabilities and disadvantages of embedded products. To a large extent this applies to air conditioners. The embedded option is called a split system. On the one hand, it has a very significant advantage and compares favorably with the usual models. The strength of the split system is its concise, convenient design.

/

Such models can maintain temperature in any selected range, consume less energy than conventional air conditioning, level respectively, they have an order of magnitude less noise, they can be turned on without fear even in cold weather, and they also have very convenient control.

/

All this can outweigh the scales towards the purchase of such equipment. However, despite the significant advantages, it is necessary to remember that embedded models with characteristics similar to ordinary ones will cost about one and a half to two times more expensive. Also, split systems are extremely sensitive to voltage surges, which can lead, if not to failure, to frequent breakdowns. To get rid of these troubles, you also have to buy a stabilizer. If a conventional air conditioner does not require any special skills during installation, only a specialist can install a split system. If a channel apparatus is used, then it will be necessary to lay not only communications that connect the external and internal unit, but also air ducts. Thus, the scale of the work increases, as well as their cost.

instagram viewer

/

In addition, the split system is stationary. An ordinary air conditioner can be completely safely moved, there is no such possibility.

/

Finally, in the event of a move, taking a split system with you most likely will not work, which cannot be said about the usual model.

/
/
/
/
/
/
  • For what devices people did not conduct wiring, and then very much regrettedFor what devices people did not conduct wiring, and then very much regretted
  • Where you should not put a washing machine in the bathroomWhere you should not put a washing machine in the bathroom
  • Why was ash added to the mortar in masonry beforeWhy was ash added to the mortar in masonry before
  • Smart sockets: why call a coffee maker or kettleSmart sockets: why call a coffee maker or kettle
  • In which direction should the interior doors not open so as not to create inconvenienceIn which direction should the interior doors not open so as not to create inconvenience
  • What types of screws are best not to useWhat types of screws are best not to use
  • What can happen if you do not have grounding in the apartmentWhat can happen if you do not have grounding in the apartment
  • Is it profitable to turn off the power supply and switch to yourIs it profitable to turn off the power supply and switch to your
  • New bill: how much do you have to pay for electricityNew bill: how much do you have to pay for electricity
  • What you will face if you combine a balcony with a roomWhat you will face if you combine a balcony with a room
  • Is it possible to restore a damaged foundationIs it possible to restore a damaged foundation
  • How to hide an iron with an ironing board so that you are always there and do not interfereHow to hide an iron with an ironing board so that you are always there and do not interfere

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
What material should the drainage system be made so that it is not afraid of corrosion and frost?

What material should the drainage system be made so that it is not afraid of corrosion and frost?Helpful Hints

The drainage system carries an important function for any private home. Its main task is to collect and remove precipitation from the roof. Properly selected material for the equipment of the sys...

Read More
Which chimney pipes quickly burn out

Which chimney pipes quickly burn outHelpful Hints

The invention of the design of the home stove influenced the development of systems whose action is aimed at the removal of hazardous smoke from the room. Over a long period of time, the chimneys ...

Read More
What should not do the floor in the bathroom

What should not do the floor in the bathroomHelpful Hints

Content 1 Glossy Tile 2 A natural stone 3 Bulk floor 4 Tree 5 Linoleum The bathroom is the room with the highest humidity in the apartment. Not every coating can withstand such conditions, so ...

Read More