Best ways to close a gap on the floor

When living in private houses, one often has to deal with such a problem as the appearance of gaps between the boards on the floor. There can be many reasons for their occurrence. But, hardly, someone because of this will want to redo the entire flooring, and to do this laborious work is completely useless. After all, you can close the cracks in the plank floor. There are several methods for sealing gaps between boards.

Close up cracks in the floor with reinforced tape

If there are small cracks in the floor, they can be repaired using reinforced tape. For these purposes, you will need to use tape with a width of 50 mm. Before starting this work, you should first thoroughly wash the floor base, degrease and wait until it dries. At the end, the gaps between the boards are sealed with tape, and its edges are attached with a stapler. To do these manipulations is very simple. In addition, this method requires minimal financial investment. This method can be considered the best if it is planned to cover the floor with carpet or carpet.

Sealing cracks in the floor putty

Filling gaps using this method is quite simple. Carefully close existing cracks, crevices and depressions with putty using a putty knife. When the treated base is completely dry, you need to grind it. The price of such a putty is not high, so this method will be affordable for everyone. In addition, work skills are not needed here.

How to close up large cracks in the floor?

For such cases, the most effective way is to use glue and sawdust. These components are mixed and carefully deepened into the cracks. After the floor dries, the treated areas are sanded. If cracks appeared in the floors due to rodents, it is recommended to add broken glass or cement to this composition. Thus, this place will be too tough for rodents.

Synthetic cord - a great way to close up the cracks in the floor

Such a cord can be purchased at a hardware store. Since it can have a different thickness, it is possible to choose the material based on the width of the gap in the floor. A hemp rope can act as a good alternative to such a cord. Before closing the gap, the cord is coated with glue. Then it fits into the slot and with the help of a spatula it is well shut up deep. As a result, a couple of millimeters should remain from the cord to the bottom of the floor. This space is sealed with glue and sawdust. Finally, the surface is ground.

The above methods are the best solution when there are cracks in the floor.