In order to cut metal, it is very important to choose the right equipment. The technology used to operate may also vary. So, you can choose an oxygen burner, conduct an industrial type of cutting or plasma. Each option has advantages and disadvantages. The most practical and convenient is plasma cutting. It may differ in performance, but it is also ideal for almost any type of metal. The process of plasma cutting must be done by professionals. If you need plasma cutting in St. Petersburg, then http://plazma-spb.ru You will certainly be able to help. At the same time, the cost of the service is acceptable. Consider the features and qualities of modern cutting with plasma, the advantages of the application.
Key positive cutting qualities
So, if modern plasma cutting was chosen for metal processing, then it is perfect for you because of these main advantages:
- Properly selected equipment will help to carry out the cutting process very quickly. 5 to 10 times faster than using oxygen equipment. But it is very important that the performance is suitable for a certain type of metal. Of course, industrial cutting will be faster. But also at a price it is much higher;
- Cutting quality will be as high as possible. This is due to the fact that the equipment is very high quality, modern and convenient to use. A burr will not remain on the metal, the created parts will be clear and accurate;
- Anyone who will work with equipment may not worry about their safety, since it is almost impossible to harm their health. Using an oxygen burner is much more dangerous;
- During operation, a place nearby does not become safe. This is due to the fact that environmental pollution does not occur. It is very important not only for the working, but also for the environment
But it is important to consider several factors before choosing a plasma cutting. It is not suitable in all cases. For example, there are several restrictions on the thickness that can be processed. If the thickness of the metal exceeds more than 10 cm, then the use of this equipment will not work. In this case, an oxygen burner is much more practical, since the thickness that can be processed is more than 50 cm. Also, the requirements for cutting are very serious. This must be taken into account.
-
Which glass cutter is not suitable for round holes
-
What design decisions from the USSR are still relevant
-
Plumbing seals: varieties, characteristics and application
-
The window between the bathroom and the kitchen, what to do with it?
-
Is it worth gluing cullets in the kitchen?
-
What mistakes make a reverse osmosis system useless
-
Patchwork style in the interior: history, design tips
-
What kind of coating should not be used for the floor in the kitchen
-
How to develop an exclusive interior?
-
What is the best waterproofing coating
-
Than it is impossible to wash off liquid glass from a ceramic surface
-
Finishing molding: design, materials, installation
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
