Errors in choosing heating boilers

Not all people living in their homes think about important points when choosing a heating boiler. But it depends on his work how warm it will be indoors in winter. What are the most common mistakes buyers make when choosing heating boilers?

The boiler power is not suitable for the area of ​​the house

If the boiler power is less than necessary for heating, then the house will always lack heat. To choose the right boiler for this parameter, you need to know the exact quadrature, wall thickness, degree of insulation, the material from which the house is built. Also, when choosing additional sources of heating are taken into account: heaters, underfloor heating.

Inappropriate design

Heating boilers come in two types: floor and wall. The former take up much more space, but their power is higher, and the latter can be accommodated in any room, as they are smaller.

instagram viewer

Not suitable for indoor use

For a floor boiler, you need a lot of space and a separate room, since it works quite noisily. He needs a separate room of at least 15 square meters. m with good sound insulation. The ceiling height should be at least 2 m, and the width of the doorway from 80 cm, windows are also necessary for the presence of sunlight and the influx of fresh air.

Water consumption not taken into account

Owners of electric boilers may face this problem. They are either flowing or with a built-in water heater. A boiler is necessary if the house has two or more points of water intake. If taps are used in the kitchen, in the bathroom there is a shower cabin, then the volume of the boiler should be about 50 liters.

The boiler has no required functionality

Do not choose the cheapest boiler models in order to save more. Each heating device has a set of required functions: automatic cut-off water or fuel in the event of a malfunction of the system, the presence of an audible signal when similar problems. These features provide security and good performance.

Ignored Specifications

Before buying a heating boiler, you need to know the heating power of the batteries, the condition of the water pipes. The heat supply depends on the material of which the communications are made. It may not be suitable for the high temperatures that the boiler produces, and corrosion will soon form.

The boiler does not match the chimney

The chimney must correspond to the internal structure of the boiler, which happens with an open or closed combustion chamber. Floor models are equipped with the first type, for which a traditional chimney, extending through the entire house, is desirable. For closed combustion chambers, coaxial flues, which are two pipes inserted into each other, are required.