Around the topic of building houses from SIP panels, disputes arise regularly. The most common questions relate to the need for proper ventilation.
If you ignore the process of ensuring high-quality ventilation in a house built using frame technology, you can provoke the occurrence of many unpleasant situations.
These include:
- Increased dampness in the rooms;
- The occurrence of fungi and mold;
- Misting of window constructions.
In turn, constant dampness can provoke rotting of the wooden frame and the subsequent destruction of the walls of the house.
Ventilation methods
It is important to provide for the installation of a ventilation system at the initial stage of building a house from SIP panels, including it in the design plan. Immediately a fair question arises regarding the natural ventilation of the premises.
It is important to note that the level of natural ventilation in the frame-type house is very low. This is due to the fact that buildings made of SIP panels are characterized by increased sealing.
The optimal solution would be to install special valves that are mounted in metal-plastic window structures and allow the room to be ventilated even if they are closed. Supply valves can be purchased in a specialized store, ordering their professional installation or do it yourself using ordinary plastic pipes.
Forced ventilation
Forced ventilation in the frame house can be achieved through the installation of electric hoods that will remove polluted and too humid air to the outside. Supply hoods not only force air masses out of the room, but also ventilate it.
The design of the supply hood should consist of the following parts:
- Fan;
- An air valve that automatically stops the flow of air masses when the device is disconnected from the mains;
- Air duct;
- Filters
- Lattice designed for air intake.
Installation of forced ventilation can be done with your own hands, but for this you need to have the appropriate skills and knowledge. Otherwise, it can cause malfunctions in the functioning of the natural ventilation system.
-
Features of the installation of half-timbered columns
-
What is the advantage of a nichrome plexiglas cutter?
-
Why does the grinder work, but the disk does not spin
-
How to make a rectangular cutout in ceramic tiles
-
What to do if wallpaper glue dries too fast
-
What mistakes are made when the radiator is connected diagonally?
-
When an adjustable floor is more profitable than a capital screed
-
How to paint from spray can without smudges
-
What primers are not suitable for application under fiberboard
-
How to cut glued tiles on a wall
-
When you need to install heating radiators not under the window
-
How to dissolve the clypeus along its length
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
