A washing machine is available today in almost any home. It helps to avoid hard manual labor, greatly facilitates life. At the same time, many people forget about the periodic maintenance of washing machines, considering them to be something familiar and completely unpretentious. However, the machines do not forgive the negligent attitude, they must be cleaned. Only then will they remain operational and have an attractive appearance. You can not make it so that scum or dirt begins to fall off in pieces. To eliminate them, there are special substances.
It is best to start the search for the best washing machine care product in the store. There are many options for sale. They are used for both external and internal care. There are both household and professional products. Regardless of the type, the compositions must be used correctly. For example, Kalgon cannot get rid of scale, since it is intended only to soften water.
There are folk recipes for cleaning washing machines. Dirt and mold from the rubber seal and the drum can be easily and easily removed with soda.
This is a very effective remedy. It is also used to clean powder containers. Not everyone knows, but baking soda can successfully replace the expensive Kalgon, as it also softens the water.
If the internal parts are covered with scale, you can use citric acid or vinegar. They also cope with unpleasant odors. It is necessary to work with acetic acid very carefully, as it can have a negative effect on the skin and has a very sharp smell.
Mold in certain situations can also be a major problem. In this case, the washing machine should be cleaned with copper sulfate.
Whiteness is a great option for removing odors and disinfecting. The composition of the mixture must be studied carefully. Do not use compounds with chlorine and its derivatives for cleaning.
High rigidity and many impurities of tap water are the main enemies of the washing machine. It is worthwhile to install a filter so that they cannot get inside the equipment. Alas, very rarely people use filtering devices for industrial water. Most often, all is limited only to a drinking tap. Impurities and salts settle inside the equipment, forming scale. In order not to deal with it in the future, it is much easier to filter the water in advance.
-
For what devices people did not conduct wiring, and then very much regretted
-
Where you should not put a washing machine in the bathroom
-
Why was ash added to the mortar in masonry before
-
Smart sockets: why call a coffee maker or kettle
-
Frequent and dangerous mistakes for working with a grinder for beginners
-
What types of screws are best not to use
-
What can happen if you do not have grounding in the apartment
-
New bill: how much do you have to pay for electricity
-
The weaknesses of cheap food: how to extend the life
-
Is it possible to restore a damaged foundation
-
Is it profitable to turn off the power supply and switch to your
-
What you will face if you combine a balcony with a room
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
