There is a strong opinion among apartment owners that it is worth using polystyrene to install sound insulation. This material is quite light and cheap. However, experts advise to abandon this idea, especially when it comes to mounting such sound insulation on the ceiling. Professionals have already verified that polystyrene is more effective on the floor. In this case, it is placed when pouring floors or under plaster, and then it really absorbs sounds quite well. But with the ceiling, things are much more complicated. In this regard, on the Internet you can find a lot of conflicting reviews. The installation looks as follows.

Very careful preparation of the ceiling is required. All old paint, plaster is removed from it, stripping is carried out with a stiff brush to remove the smallest debris and dust. Then it is necessary to cover it with a primer in two layers, which will provide good adhesion. A liquid waterproofing agent is applied over the primer. When it dries completely, a fine-mesh reinforced mesh is fixed. It is necessary as a base for building glue, noise insulation boards are already glued to it, and the joints, respectively, are covered with sealant. But that is not all. After the glue has set, you need to fix the frame from the metal profile, and it can not be left in its original form, it is important to insulate it with a soundproof tape. Next, plasterboard sheets are mounted in a classic way, and the seams between them are rubbed with soundproofing sealant. If the drywall or the frame in some place comes into contact with the pipes, it is necessary to use special noise-insulating linings. Next up is the standard drywall finish.

In addition, it must be noted that the foam is not initially positioned as a soundproofing material. If it is placed under the screed, it is only able to partially absorb shock noise. If an extruded polystyrene is taken, then on the contrary it transmits sound better than normal, due to its density.
If you still want to use this particular material, you will have to resort to the method of alternating a dense and porous version. Thus, a sandwich will be made of two layers of plywood 1 cm thick each, and polystyrene is laid between them. Also, if we are talking about a living room, then we must take into account the high combustibility and fire hazard of the foam. Against its background, mineral wool stands out in this regard, which is recommended by professionals.

-
10 rules on how to best repair an apartment for rent
-
Soundproofing and soundproofing of plastic windows
-
The advantages of houses up to 150 square meters. m
-
What errors lead to water hammer in the heating system and how to avoid them
-
12 tips for choosing a good construction team
-
How to make repairs once and for a long time
-
5 reasons to change the wizard without waiting for the repair to finish
-
When is it better not to glue paper wallpapers?
-
Why you can’t save money by installing infrared heating instead of gas
-
When an adjustable floor is more profitable than a capital screed
-
Smart sockets: why call a coffee maker or kettle
-
7 mistakes that people usually make when self-organizing home construction
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen