Wall panels for the kitchen: review of materials, cost, photo

Wall panels for the kitchen are a real lifesaver. This cladding material will help in many cases. Uneven and crumbling walls are easy to fix with inexpensive materials that hide all flaws in one fell swoop. At the same time, installation will take a little time, such a wall will last a very long time, and the choice of design solutions is simply huge.

Features and Benefits

Kitchen wall panels solve many problems:

Attention! Earned on our website kitchen designer. You can familiarize yourself with it and design your dream kitchen for free! May also come in handy wardrobes designer.

The surface is leveled in one layer, without removing the old one.
All external electrical wiring is hidden under them.
Places of connections to columns and boilers will look very neat.
The entire working area is protected from splashing water and grease.
Additional insulation and sound insulation.
The ceiling and curved walls are leveled. This option is optimal for apartments with floor slabs that shift and sag over time.

instagram viewer

Such repairs are convenient in that there is almost no construction waste. It is also very good that you can not wait for the paint and plaster to dry, do not carry out a "wet repair".

The decorative surface will help to combine the worktop with the wall and become a catchy accent of the interior. You can extend the kitchen wall panel even further and cover the ceiling with it. See how the backlit glass looks original - flash panels for the kitchen photo. The room gets wider. Moreover, each drawing is individual and such products look memorable.

What types are there

Wall panels are produced for interior and exterior decoration.

Outdoor (plaster, stone, concrete). Today's technologies make it possible to use even particle board impregnated with paraffin for the street.
There are a lot of options for interior decoration of premises: 3D (made of plastic, MDF, gypsum, polyurethane); soft (made of eco-leather); bamboo.

Wall panels vary in functionality.

To protect working areas - aprons (up to 60 cm wide).
For the protection and decoration of walls, and their dimensions can be limited only by the footage of the room.

Materials (edit)

Plastic, PVC. The cheapest, but at the same time quite durable. They are lightweight and flexible and can be easily mounted on curved surfaces. Plastic is mounted on walls and ceilings with high humidity (in unheated houses), since the material is not subject to decay. They are also easy to clean with conventional detergents. In color panels, the drawing is applied by offset printing or thermal transfer, and on top is fixed with a layer of varnish. The second option is lamination. In this case, the plastic becomes textured.

Plastic may not be installed in all work areas. Those that are adjacent to a gas or electric stove will deform at high temperatures. Disadvantages of PVC - soft and flammable material, easily scratched. White strips will surely turn yellow after a while.

Another type of such panels is acrylic. They are lightweight, durable, do not fade and have the best gloss properties. Their only drawback is their high cost.

Particleboard and fiberboard, coated and uncoated. These materials belong to the middle price range and vary in price and performance. Only standard sizes are on sale. But there are a lot of design options. You can choose panels of all possible thicknesses, with the required degree of load.

Chipboard has been laminated for a long time, and such products are much better than conventional wood-based panels. In the latter, a thin film of paper serves as a protection, which over time will surely begin to let fat and moisture inside. The surface will swell and deform. In laminated surfaces, the top layer is protected by a durable transparent varnish, which protects the internal structure of the board from mechanical stress and moisture.

MDF and HDF board these are high density hot-bonded materials. A novelty - a thin HDF board is in no way inferior in quality to a thicker MDF. Such surfaces can be installed in all areas (dining and working). The materials are completely harmless (in the composition - trees from the areas of sanitary felling), do not lend themselves to getting wet and high temperatures.

The decorative plastic or laminate layer can be anything:

glossy,
plain,
under the skin, natural stone or wood,
imitate popular types of metal.

In some cases (in conditions of high humidity), the board has to be laminated on both sides.

Glass - ordinary with or without a pattern, hardened or multi-layered. Glass is uniqueness and light. This finish is the most expensive, but also the most spectacular. One-piece decorative glass panel for kitchens is always made to specific dimensions. Both ordinary glass (printed film and outer glass layer) and three-layer glass are used, which cannot be damaged or scratched (at least 4 mm thick). In the latter case, under the glass is a decorative film layer with a pattern. And below it is the base of the wall panel.

Another option is small glass and mirror squares, ranging in size from 18 to 60 cm. They can have seams or look like a monolithic wall. Glass is also used to protect expensive and unstable finishing materials - antique tiles, decorative panels.

Main decorative techniques:

staining,
matting,
3D printing,
the photo.

Such products can be mounted over the sink and stove. Glass does not absorb odors, is easy to clean, hygienic and does not change color over time. Moreover, each apron makes the interior unique.

Another expensive type of wall panels is wooden. The walls can be sheathed with both whole slabs and small slats. The base is made of cheap technical species, but the top layer is veneer of expensive wood. Their connections are in the form of grooves or protrusions, and after installation they become completely invisible. But any tree under the influence of steam will dry and crack, and upon contact with water it will absorb moisture. Therefore, it is best to fix such walls in the dining area, and to combine them in the working area.

Dimensions (edit)

Wall panels for the kitchen are of different sizes, which is very convenient for all types of premises. You can always choose the best finishing option. The average thickness of the slab is from 3 to 10 mm, the length is 2.5 or 3 m.

There is a trend towards a decrease in wall panels by manufacturers. If the first copies were 1 cm, now there are a lot of 3-4 mm on sale.

Rack and pinion. These are narrow planks with a width of 12 to 50 cm and a length of up to 3 meters. Most often these are inexpensive plastic products connected with grooves and fixed to the battens.
Rectangular, tiled. Their length is from 30 to 60 cm. Such panels in the kitchen instead of ceramic tiles will be a great replacement.
Leafy ones are the most convenient. Their sizes range from one and a half to three meters. They are the easiest to install - cut out the required size and attached to the wall.

Colors and decor

Even cheap plastic mimics wood quite plausibly. The varnished texture can be embossed and resemble a board, marble or textured plaster.
White slats are in perfect harmony in Provencal style kitchens, consisting of light pastel shades.
For rooms in a rustic style or country, wood or its imitation is suitable.
But in classic kitchens in daylight, glossy plastic will look like a foreign body.
Glass can be used to transform and enlarge small and dark rooms. White typefaces go well with dark photo prints. A strict monochromatic interior with the help of a bright apron will get the accent it needs.

How to install it yourself

Materials are attached in all possible ways: on metal profiles, lathing, glue or directly on the wall.

When installing PVC slats, the distance between them should be calculated based on their weight and width. The thinner and lighter they are, the smaller the spacing should be. The sides of the panels are assembled together using grooves, and the sides and top are closed with a similar plastic profile.
Finished sheets of chipboard, MDF are cut out and the edges are closed with special tapes. This must be done without fail, otherwise moisture will get inside, and the plate will begin to exfoliate.
Installation of chipboards is carried out in any direction (vertical and horizontal). If the panel extends to the entire wall, then it is mounted using special hooks. A special metal frame is made for very wide and heavy sheets.
Manufacturers do not recommend using screws directly into the wall or on the crate, as the integrity of the wooden panel may be compromised. It will begin to absorb moisture and fail.

How much are

Wall panels are very popular due to their versatility and versatility. Some of them are quite expensive - especially for textured and textured sheets (the so-called 3D).

Plastic and PVC belong to the economy option. Their price is from a thousand rubles per sheet (2.5m * 1.2m).
The price for MDF panels starts from 1.5 thousand. rubles (3m * 60 cm). Panel lamination is available in single and double pressing (HPL). The latter sample is more expensive, but for the working area of the kitchen it is most justified.
Glass panels have a different price range. Ordinary glass with a pattern will cost you less and you can cut and fix it yourself without resorting to the services of a master. But hardened is much more expensive, this is an expensive segment of finishing materials (from 2 thousand rubles). rubles per running meter).

Review of the best manufacturers

Isotex. This company from Finland is quite famous in Moscow and abroad. Their kitchen wall panels are moisture resistant. Installation can be carried out in rooms with unstable temperature and humidity indicators.

At the heart of such a panel is fiberboard with a paper or textile coating.

A German company that produces all kinds of wood products: laminate, parquet boards, cork coverings, veneered parquet and MDF wall panels. A novelty of the last season - 3D-panels made of MDF, interconnected by a system of double grooves.

They can be used in any room, even saunas, avoiding only places with running water.

Green Line. Leading domestic manufacturer of PVC panels, whose facilities are located in the Vladimirovsk region. In its catalogs, you will select a wide range of 3D plastic products that you can buy inexpensively and assemble yourself.