The best corded screwdrivers: TOP 12, rating of 2023, an overview of inexpensive, professional and impact tools for the home, price

Sometimes you can come across the opinion that a corded screwdriver is bought only because the price is lower than for cordless models. At least you don't need to buy a battery. In fact, a tool powered by an electrical network is a more advanced and reliable device.

What to look for when choosing a screwdriver?

Anyone who has had to wrap several hundred screws a day can confirm that the cordless tool starts to pull its hands already in the second hundred fasteners. And at a high pace of work, the cordless tool simply does not have time to charge at least to the minimum level.

If we compare the design of a cordless screwdriver with a cordless one, then we must immediately highlight several important features:

1. The mains model is always lighter than the battery model, even without taking into account the weight of the battery. An adult can easily wrap fasteners with one hand.
2. A screwdriver powered by an outlet heats up less, does not make so much noise.
3. "Networker" is not afraid of vibrations, shocks, falls on the concrete floor. For cordless tools, mechanical shock has always been a problem and often the cause of battery failure.
4. After about 2 years, the cordless screwdriver starts to lose power due to battery drain. A corded screwdriver has a service life of at least 10 years.

If you have to work in the cold, then there are practically no alternatives to network models. In battery models, the charge on the batteries drops very quickly.

All models of network screwdrivers can be divided into two groups. The first includes "workhorses", hardy, practical, but not always easy to handle. These are usually the best inexpensive corded screwdrivers. The second category includes screwdrivers that were made for sale, at best for home use.

Appearance, body and handle design, weight and dimensions, as a rule, do not affect the quality and capabilities of a corded screwdriver. Therefore, it is quite difficult to choose a tool from the picture on the computer screen. This requires experience with screwdrivers.

Most models are available in drill-driver format. This means that such a screwdriver, as a rule, has a self-tightening chuck in which you can fix both a bit and a drill with a diameter of 1-10 mm. This does not affect the setting of the bit. The “quick” chuck holds a drill up to 5 mm without any problems.

Therefore, if most of the work of a corded screwdriver is related to drilling, then you need to look for a model with a chuck that is clamped with a key. It is much more reliable, durable and provides high hole drilling accuracy.

When choosing a power screwdriver, you need to pay attention to the basic requirements for the model:

1. Motor power. If the motor is of high quality (branded), then 250 watts will be enough to work. For use in drill mode, at least 400 watts is desirable.
2. The main characteristic of a corded screwdriver is torque. To work with a bit, 30-40 N * m is enough, you can easily wrap 5 mm self-tapping screws to a depth of 70 mm. For turning out old screws, sometimes even 50 N * m is not enough, optimally 70 N * m.
3. Reduction gear. The most expensive part of a screwdriver. It is better to choose models with a large margin of torque. In such a tool, the gearbox is more powerful, larger gears and satellites are used.

If possible, it is better to give preference to brands and manufacturing companies whose products are famous for their durable and reliable mechanics. Replacing the motor in a corded screwdriver is inexpensive, but repairing the gearbox requires significant efforts to select high-quality components.

Advice! The quality of the gearbox can always be checked under load. If the case heats up after a couple of dozens of screwed screws, makes noise, buzzes, this screwdriver assembly may need to be adjusted, and sometimes the lubricant needs to be replaced.

Typically, a corded screwdriver has two speeds: for drilling and tightening self-tapping screws. If the model has one speed, then this is a tool without a drill function. Buying such a screwdriver makes sense if the workshop already has a high-quality drill. The simpler the tool, the more reliable it is.

This is useful! The best cordless screwdrivers ranking 2023.

The best inexpensive corded screwdrivers

Many budget-level screwdrivers differ from the best corded screwdrivers in the middle price niche only by the absence of a few features or less torque. If you buy a tool for the home, then it does not have to be BOSCH.

Pulsar DSh 300 792

Inexpensive, but powerful enough tool - 300 W, so that it can also be used as a drill. Designed in Russia, manufactured in China.

Either a standard bit or a drill up to 6 mm is placed in the keyless chuck. The torque is only 19 N * m, but this is enough for drilling small holes and tightening standard carpentry screws.

The torque can be adjusted in 9 positions. Among the shortcomings, they note a large weight (1.3 kg) and a short cable - only 2 m. The price is 1500 rubles, 12 months of warranty service.

Energomash DS-650

A complete drill driver that can be used both for home repairs and for small jobs in the country or in the garage. A drill up to 10 mm in diameter or a bit is placed in the keyless chuck. Two spare contact brushes for the electric motor are supplied with the corded screwdriver.

Characteristics:

• power - 650 watts. This is the level of the electric mains drill;
• torque - 45 N * m. It is possible to drill holes in metal up to 8 mm, in wood - up to 20 mm;
• weight - 1.3 kg.

There is a reverse, a brake and a shaft lock for removing the tool. The advantages of the Energomash DS-650 screwdriver are a smooth start without strong jerks. Disadvantages - lack of backlight, rapid wear of the brushes and a short network cable - 2 m.

The price of the model is 2100 rubles. with 14 months warranty service.

Zubr DSh-M3-500

Inexpensive drill driver, designed for long-term work in repair conditions. The tool uses a 500W brushed motor. At the output of the gearbox, the torque is 45 N * m at 500 rpm when tightening fasteners and 1800 rpm when drilling holes. You can choose the speed from 21 adjustment positions.

The weight of the Bison is 1.6 kg, the maximum size of the drill is 13 mm. The advantages of the model include easy maintenance and cleaning from dust, it is possible to manually tighten the cartridge if you plan to tighten self-tapping screws longer than 70 mm. Screwdriver power cord in soft silicone insulation, length - 5 m.

The price of a network tool is 3200 rubles, 5 years of warranty service.

This is interesting! 14 best impact drills for the home.

The best corded screwdrivers in terms of price-quality ratio

The ranking of the best includes models of well-known brands, the cost of which is below the average value for corded screwdrivers. The assessment was carried out according to the level of reliability and optimal technical characteristics.

Makita DF0300

In this model, the developers focused on the function of a corded screwdriver. Therefore, the engine power is up to 320 W, and the torque is raised to 56 N * m. The weight of the corded screwdriver turned out to be relatively small - 1.2 kg.

It is possible to wrap self-tapping screws by adjusting the torque in one of 20 settings. The two-stage gearbox can be used at full torque or set to operate in a soft mode of 21 Nm. There is a function of reverse and blocking of the shaft when changing bits.

Chuck quick tool fixing (1-10 mm). The design of the corded screwdriver provides protection against dust ingress, so that wear on the brushes is minimal. Makita DF0300 can be used outdoors, work in a very dusty environment.

The price for the model is 4980 rubles, warranty service for a year, subject to registration of the purchase.

Resanta SSH-550-2

Network screwdriver of the famous Baltic brand. Produced in China. It features high-quality assembly and well-optimized characteristics of the mechanical and electrical parts of the tool.

The power of the Resanta brush motor is 550 W, this is already a fairly powerful tool with a long service life. It is rather an electric drill with a full range of screwdriver functions. The torque on the shaft of the two-stage gearbox is only 36 Nm. This is the optimal value for simple installation and finishing work. The twisting force on the shaft is enough to wrap a self-tapping screw up to 10 mm in diameter.

The weight of the corded screwdriver is 1.4 kg. The design provides 19 positions for adjusting the torque, there is a reverse and backlight.

The price for Resant SSH-550-2 is 3000 rubles, the warranty is 60 months from the date of sale.

Fiolent ShVZ-6-RE

This model belongs to the group of combined. A screwdriver and a screwdriver are combined in one design. Designed and manufactured in Russia. It is used mainly when laying plasterboard sheets, assembling furniture, various equipment, and can be used for repair work in a car repair shop.

Distinctive features of the Fiolent cordless screwdriver:

• power - 610 W, rotation speed can be changed smoothly from 0 to 2800 rpm;
• instead of the usual quick-release chuck, a magnetic holder is used for screws, self-tapping screws or a hex bit;
• a precise clutch is installed, which provides instant shock-free stop of the shaft when the self-tapping screw is completely immersed or the screw is tightened.

In addition, you can install a holder for tightening hex nuts and bolts. That is, Fiolent can be considered as a universal drive for tightening fasteners of all kinds. The only negative is the low quality of the plastic molding of the case. Sometimes you have to adjust the details manually.

The price for Fiolent is 2939 rubles, warranty service for 3 years.

The best professional corded screwdrivers

A professional level tool is quite expensive. It makes sense to purchase a PRO-level corded screwdriver only if you have to construction of a house, major repairs or similar work has to be carried out several times once a week.

Makita 6805 BV

The cordless screwdriver is designed and manufactured in Japan. The tool is designed to work in production conditions, with a maximum load of 10-12 hours of working time per day. The design uses a large number of parts made of aluminum and steel, so the screwdriver turned out to be heavier than the usual model, weight - 1.9 kg.

The model is equipped with a 510 W brush type motor, with a shaft rotation speed of 2500 rpm. The gearbox can be manually reconfigured to 6 different torque levels.

Instead of a quick tool chuck, a screwdriver uses a hexagonal bit holder. It is possible to install four basic sockets: for screws, screws, cap socket for nuts and internal hexagon.

The amount of torque is small, only 26 N * m, but thanks to the presence of reverse, the level of depth control and the breaking sleeve, the twisting occurs completely and without impact. Which is very useful when screwing fasteners into soft lining.

This screwdriver model is equipped with an additional protective insulation of the electrical part of the tool, so you can work in conditions of high humidity, fog or rain.

The only drawback of the Makita 6805 BV is the short cord.

The price is 8500 rubles, the warranty period is 1 year.

Hanskonner HID2145PC

Network tool of professional type. The brand was developed in Germany and manufactured in China. The peculiarity of the screwdriver is that with a relatively high power of the brush motor (450 W), a high torque (50 N * m) was obtained. Hanskonner HID2145PC can be considered one of the best in terms of "power - torque".

The result is a corded tool that requires no readjustment when driving screws or drilling holes.

Characteristics:

• quick-release tool chuck 1.5-13 mm. The power on the shaft is enough to effortlessly drill holes in metal with a diameter of up to 13 mm, in wood - up to 20 mm;
• the gearbox has 23 torque control positions;
• weight - 1.9 kg;
• power cord length - 4 m.

In addition, there is a reverse, instant shaft stop clutch. Overall, the build quality is much better than most brands, even the likes of Makita or DWT.

The price of a screwdriver is 6500 rubles, the warranty period is 12 months.

Bosch GSR 6-45TE

Network tool used in industrial cladding assembly, panel furniture, construction work. One of the most powerful and reliable screwdrivers. The power of the brush motor is about 700W.

The design uses a clamp for bits and nozzles of various profiles with a section of 6.35 mm. The quick-release chuck is not used, and, accordingly, it is not possible to install a drill.

The corded screwdriver turned out to be quite light - 1.4 kg. At the same time, the torque on the shaft is only 12 N * m. That is, even if you install a self-tightening cartridge, then it will be possible to drill with a screwdriver only with a tool up to 3 mm.

The design has a reverse, adjustment of the fastener immersion depth, a precision shaft stop clutch. The length of the cord is 3.9 m. A magazine attachment can be installed to quickly feed screws onto the bat.

The tool turned out to be very reliable, with a minimum level of noise and vibration. The only negative Bosch GSR 6-45 TE is its price, today the model is sold for 22 thousand rubles. rub. The quality of the corded screwdriver can be judged by the fact that the project was developed by BOSCH, and the production is located in Switzerland. Warranty - 1 year.

The best corded impact driver

A corded tool may not look great for punching holes. Cord may interfere with operation. But in practice, corded screwdrivers with impact functions turn out to be quite efficient, and in terms of functionality they are not inferior to hammer drills.

It may seem that the presence of an impact function in a corded screwdriver is impractical. But it is not so. Impact drills, as a rule, have a mechanical gearbox made of higher quality metal, reinforced bearings and shaft supports. Therefore, even the choice of a corded screwdriver-drill makes sense, since the resource of the tool, its reliability and ability to work in extreme conditions is much higher than that of conventional models.

Makita HP0300

This model is an example of how a corded impact driver doesn't have to be big and bulky like most rotary hammers. The Makita HP0300 has impact features, a full range of screwdriver options and the ability to punch holes for dowels.

Characteristics:

• the power of the collector electric motor is only 320 watts. This is enough for drilling and tightening self-tapping screws, but not enough for punching holes. Therefore, the diameter of holes in concrete is limited to 8 mm;
• torque - 56 N * m, the amount of force is sufficient for screwing screws up to 120 mm long and 6 mm in diameter. In comfort mode 28 mm;
• drill driver weight - 1.3 kg;
• keyless chuck for tool 1-10 mm;
• power cord length - 2.5 m.

The design contains all the main functions of a screwdriver: reverse, stop the shaft with a brake, two speeds - for drilling and for screwing fasteners.

The Makita HP0300 is also distinguished by reinforced body insulation, which does not mean that the drill/driver can be left in the rain. Additional protection is needed to block dust from entering the brushes and contact pads of the collector. In terms of protection, Makita handheld power tools can be considered one of the most advanced. At the same time, cleaning the brushes is no more difficult than that of competitors. You can blow, but it is better to rinse and clean with alcohol.

Price - 4600 rubles, warranty - 12 months.

WORX WX318

One of the most powerful impact drivers. The design is developed in Germany, is issued in China. The network tool is equipped with an 810 W motor, with a reinforced gearbox and drummer. Accordingly, the weight increased to 1.7 kg, coming close in terms of weight characteristics to perforating devices.

But WORX WX318 is still not a puncher. The design uses a high-speed and low-noise motor. The tool (bit or drill) is installed in a conventional quick-release chuck. Therefore, during the operation of a screwdriver, there is no noise and rumble inherent in rotary hammer gearboxes.

The diameter of the tool that can be installed in the chuck is 13 mm. This is enough for any construction and repair work at home.

Features of the WORX WX318 network tool:

• shaft power - 800 W;
• torque at the outlet of the gearbox - 32 N * m;
• the frequency of impacts when working in the perforation mode is 4800.

There is only one speed, but there is a chuck lock button, reverse and the ability to smoothly adjust the speed when working in the drilling or screwdriving mode. The kit includes a handle for holding the tool with two hands, as well as a carrying case and a set of 6 drills. The length of the cord is only 2.5 m.

The cost of a network impact screwdriver is 7600 rubles, a 12-month warranty.

Deko DKSD400W

The review begins with one of the simplest and most affordable screwdrivers with the functions of a corded drill and a hammer drill. Produced in Malaysia and China, if possible, a Malaysian instrument is preferable. Corded screwdrivers from Malaysia have minor flaws, the electrical and mechanical parts work, as a rule, without comment.

Network tool features:

• power - 400 W;
• torque - 20 N * m;
• weight - 1.3 kg;
• "quick" chuck for drill and bit 0.8-10 mm;
• one rotation speed - 780 rpm;
• power cord - 2 m.

There is a board for smooth speed control, you can choose the optimal value for drilling or piercing a hole. For concrete, the maximum diameter is 8 mm. The corded screwdriver turned out to be balanced and easy to use. The only negative is the plastic from which the body of the network tool is molded, which is quite thin. Therefore, you should avoid dropping the drill/driver on the floor and not leaving it near heating appliances.

Price - 1560 rubles, warranty - 1 year.

Which screwdriver is better: corded or cordless?

Each tool has its own advantages and disadvantages. Often a screwdriver, no matter whether mains or cordless, is acquired under the impression of advertising or on the advice of friends. In fact, the approach should be strictly individual, taking into account your own preferences and habits.

Advantages and disadvantages of cordless tools

The only important plus of using a battery instead of a power cord is mobility. That is, a screwdriver can be taken to the country house, to the roof, to winter fishing. In this sense, even an inexpensive screwdriver with a pair of replaceable batteries remains unrivaled.

In addition, according to many users, the absence of a power cord makes the tool more convenient to use. work, especially if you need to constantly move or work with large dimensional parts, for example, furniture.

If we compare a battery model with a network model of about the same class, then the first one always has more torque. The difference can be twofold. Among battery-powered screwdrivers, there are many models with a torque of 60-70 N * m, there are even 100 N * m each. Whereas in network devices the ceiling is 50 N * m, and the average value is 30 N * m.

This means that a very large self-tapping screw (screw) in oak or acacia can be wrapped with a cordless screwdriver to a great depth. It is much more difficult to do this with a network tool, perhaps only with the most powerful devices. But in such an “advantage” there is one drawback - a large torque often causes injury to the hand.

The disadvantages include the need to care for the batteries, the need to buy new batteries as they fade and the capacity of the old ones decreases. Most often, Li-Ion batteries are included, which become unsafe if not properly charged. Overcharging, a short circuit in the wiring of a screwdriver, a faulty charger can cause a fire in a lithium-ion battery. In addition, the battery loses a lot of charge at low temperatures.

Why is a cordless screwdriver better than a cordless one?

At first glance, there are not so many reasons to use a tool with mains power - less weight due to the lack of a battery and no need to buy new batteries as old ones wear out. In fact, a corded screwdriver turns out to be more profitable than a battery-powered one, and in addition, a reliable, simple and unpretentious device to use.

Advantages of network models:

1. Light weight. The center of gravity is shifted to the point of application of the torque force in the process of screwdriving or drilling.
2. Less discharge currents flowing through the wiring of the screwdriver. Battery models get very hot, so they require intensive cooling of the gearbox and engine.
3. The mains-powered tool can be used to drive long self-tapping screws of 120 mm without limiting the working time. The battery will overheat in the third or fourth dozen of the wrapped fasteners.

In addition, repairing a corded screwdriver is much cheaper. Often the electric motor can be rewound with your own hands. Whereas in a cordless screwdriver, engine repair is often impossible at all.

As a result, corded screwdrivers are chosen primarily for the home workshop. They are not often used, and the presence of a power cord does not affect the result of work in any way. Moreover, the absence of batteries does not require their periodic recharging and running under load.

A corded screwdriver, regardless of model, lasts a long time. Even the appearance of a small play on the shaft due to the natural wear of the bearings does not affect its performance. But if the network tool is used primarily as a drill, then it is still better to choose a model with the highest quality mechanics.

Tell us about your experience with corded screwdrivers. Which model do you think deserves more attention? Bookmark the article and share it on social networks.