The best screwdrivers: for home, summer cottage, garage, TOP 12 rating, review, pros and cons, photo

Of all the tools available in the house, screwdrivers are rightfully considered the main ones. Moreover, most often this is not a ready-made set, but simply a scattering of tools that differ slightly in design, shape of the handle and weight. Usually the best screwdrivers are selected, several tool options with slots of different sizes and a cross, as they say, for all occasions.

What to look for when choosing a screwdriver?

The buyer, of course, can choose a tool, simply by weighing it in his hand, determine how good the handle turned out to be. Are there rubber pads, is the size of the slot suitable?

In fact, in this way you can choose the simplest model, for example, an indicator screwdriver. In this case, the tool only needs to be checked for neon operation inside the transparent handle; no other requirements are usually imposed on the indicator. This is a specific device for monitoring the electrical potential at the terminal, for an electrician it is as important as a torque wrench for an auto mechanic.

When choosing a model, you can focus on a specific brand or manufacturer of screwdrivers. On the other hand, it will be useful to pay attention to three main features that are characteristic of the best screwdrivers:

1. The rod must be made of tool steel, springy when bent. The working end must be hardened. For dielectric models, the rod is covered with insulation.
2. The handle should be of a special shape, often with a corrugation, an emphasis on the back and a sub-finger stop.
3. The working rod must be pressed into the plastic of the handle. Moreover, slots must be stamped on the back side for adhesion to the plastic or wooden base of the handle.

In multifunctional models with one shaft and several interchangeable bits, you need to pay attention to the thickness and strength of the back of the handle. As a rule, the rod is made tubular, with landing sockets for bits at both ends. Interchangeable tips are stored inserted into the socket inside the handle. If you hit hard with such a screwdriver, then the spare bit easily pierces the back of the case.

Purpose of the screwdriver

There are several basic types of instrument. A screwdriver can be universal or specialized. Accordingly, each type has its own requirements:

1. Locksmith or standard screwdriver. It is necessary to pay attention to the size and elasticity of the metal rod, the width and length of the slot (for a slotted model) or a cross for a Phillips screwdriver. Pay attention to the shape and size of the handle.
2. Watch tools. Used to remove screws with a size of 0.5-1.5 mm. Usually the head of the screw is made with a slot, but there are also cross-shaped ones. Made entirely from tool steel. A special feature is the presence of a sub-finger rotating stop and a special notch on the handle that prevents fingers from slipping during operation.
3. Models for an electrician. They are distinguished by a dielectric handle, a long and thin pin (with an insulated surface) with a slot or a cross-shaped tip. Most often sold in a set with bits of different shapes. When choosing, special attention is paid to the shape and quality of the handle material.
4. Cordless screwdrivers. Massive long handle, inside which the engine and battery. Instead of a pin, a shaft with a collet clamp is installed. There are models with only direct direction of rotation, usually these are tools for assembly lines. For professional repairmen, cordless screwdrivers are produced with direct (clockwise) and reverse rotation.

Advice! If you have to work with different types of screws, then it is better to choose a set with interchangeable heads. In addition to the traditional slot or cross, another two dozen different profiles can be used on a screw mount.

There is a separate class of tools - impact screwdrivers. They are used to remove rusted screws. Previously, a chisel with a steel heel "on the back of the head" of the handle was used for these purposes. She was inserted into the slot of the screw and beaten on the heel with a light hammer with a twist.

Material

Branded tools are made of chrome vanadium steel or forged metal with additional heat treatment, hardening of the working surface up to HRC 47-52 units. Such a tool will last more than one year, it is easy to distinguish it by the blackened surface of the slot or cross.

Chinese tools are often made from low-carbon St3, St5. Due to the low quality of the metal, the rods are easily bent, the working edges are quickly erased, it is almost impossible to restore such a screwdriver.

For the handle, plastic with a hard rubber (not silicone) or rubber-plastic copolymer finish is best. Such a handle lasts much longer than plastic or wood.

This is interesting! Rating of the best axes: review, description, pros and cons, price. Rating of the best wrenches: overview, types, purpose, pros and cons, price.

The best standard screwdrivers

The most common tool in any home. But even standard models can vary greatly in design, so it is best to choose a universal screwdriver according to the way it is used. Many craftsmen do not let go of it in their work, it replaces the probe, and often the mount or even a chisel. But usually a standard tool is needed only to unscrew a couple of screws during the next repair.

Universal option: Rexant SL8x150 mm 12-4724

Robust and reliable tool. The length of the rod is 150 mm, the width of the sting is 8 mm, this is quite enough for most household tasks. The tip is hardened to HRC 52.

The shaft is soldered into the body of the handle with a shrink fit, which prevents it from turning under load.

Classic model TOPEX 39D255

Another version of the classic high quality screwdriver. The features of the model include a large length of the rod with a wide slot. The edge has been carburized, heat treated and magnetized. That is, the end of a screwdriver can easily catch small steel fasteners.

High-quality molded handle with a rubberized surface for a finger grip.

Impact version of the "classic" Jonnesway SL D70S5100

A good model for any occasion. No screwdriver rating is complete without the Jonnesway SL D70S5100. The tool belongs to the standard three-in-one model. In addition to loosening screws, a screwdriver can be used as a chisel or pry bar. The strength of the chromium-molybdenum alloy is simply enormous.

On the back there is a "penny" on which you can beat hammer. It is believed that a screwdriver can be used to unscrew rusted fasteners, but in practice it turned out that this is not very convenient.

The best special screwdrivers

This is a special category. These are not even screwdrivers, but a specialized tool or device, so you need to know exactly the purpose of the model and its performance. Otherwise, you may be injured or break the tool.

Model Stanley 100-500V PRO 200MM 66-120

One of the best indicator screwdrivers in the class, from a well-known manufacturer. You can check the potential up to 500 V. Moreover, the strong insulation of the steel rod is made of epoxy resin. It will not break through the voltage, it is difficult to damage even with a sharp knife.

Main advantages:

1. Compact size, comfortable transparent handle.
2. An ordinary neon is used as a voltage indicator. You can check the voltage at low temperatures in the cold, where the LCD indicator just freezes.
3. Long service life.

The indicator screwdriver can be used as a normal multipurpose screw driver. The hardness of the metal is lower, but, according to reviews, this does not prevent it from being used for its intended purpose.

Impact screwdriver WHIRLPOWER

A tool with a massive locking chuck for interchangeable nozzles and a very thick handle with a large supporting surface on the back of the head. One of the best models for situations where you need to manually unscrew a rusted screw.

The wide bearing surface of the handle makes it possible to lean with the whole body weight on the fasteners when unscrewing, in order to avoid breaking the splines or the cross.

Reversible VIRA 302012

Used for unscrewing and tightening screws located in inconvenient places. For example, when repairing household appliances, fasteners often have to be turned out by hand blindly.

VIRA 302012 sits well in the hand, thanks to rubber pads it does not slip even in wet fingers. Sufficiently reliable ratchet and rotary switch for the direction of rotation. True, you have to switch with your fingernail, so you need to get used to the operation of the tool.

The kit includes a set of six bits and an extension cord. The entire metal part is made of alloyed chrome-vanadium steel, so the tool is quite reliable.

Advice! The reverse screwdriver is not intended for unscrewing rusty screws. If you do not follow this rule, you can easily break both the ratchet and the ratchet.

The best screwdriver sets

Typically, such a kit includes several tools with the same type of handle, but differing in the length of the rod and the shape of the tip. Buying a set justifies itself, wholesale screwdrivers are cheaper, plus there is a box for storing them. But before making a choice, you need to use any screwdriver from the kit for at least a couple of weeks.

Set KING TONY 3310MR

The best option for a home workshop or for a locksmith who is professionally engaged in the repair of household appliances. The set consists of four Phillips screwdrivers and four with a flat blade, with a width of 3 mm to 6.5 mm. Four more tools of the set have cruciform tips. Shaft length - from 38 mm (stubborn pear screwdriver for heavy screws) to 100 mm (universal model).

Advantages of the KING TONY kit:

1. Well designed metal storage box. Robust, compact and at the same time handy enough for quick tool retrieval.
2. The optimal shape of the handle is a base made of impact-resistant plastic with a hard rubber outer lining.
3. Phillips and slotted screwdrivers in the set differ in color.
4. High quality hardened tip.

The set has one drawback. The number of screwdrivers is clearly not enough, it would be possible to add a couple of slotted tools in dielectric insulation with a tip size of 10-12 mm. But, in general, KING TONY 3310MR justifies the investment.

JONNESWAY D3750P08S — home appliances repair kit

The best set of screwdrivers for those who are constantly engaged in the repair of small equipment with numerous screws, hardware, compound screw fasteners. The JONNESWAY D3750P08S set consists of eight tools (flat slotted and cross-shaped) laid on a plastic jig, covered with a transparent polyacrylic cover.

The transparent lid is the only way to keep track of the screwdrivers in the case and not lose them.

Each of the eight screwdrivers comes with an additional handle that can be used to hold the screw over a threaded hole. It is impossible to do the same with your fingers. These are not watch screwdrivers, this is a tool for disassembling mobile phones and other electronic equipment.

The best universal set Sturm 1040-02-SS1

Compact plastic case-box with a transparent lid. The kit includes 28 different items, of which only 7 units are screwdrivers. The Sturm 1040-02-SS1 can be considered an option for the home workshop.

The kit includes:

• three slotted and three Phillips screwdrivers;
• one manual reverse screwdriver with a tip for interchangeable bits;
• 20 units of interchangeable bits of various shapes: from slotted to TORX and standard hex;
• flexible bit extension.

In general, the composition of the set of screwdrivers turned out to be successful, the only drawback is the unreliable switch for the direction of rotation on the reverse screwdriver.

The best cordless screwdrivers

By design and principle of operation, they are somewhat reminiscent of battery-powered screwdrivers, but much smaller and more comfortable to use. For a cordless screwdriver, the main thing is reliability and the correct adjustment of rotation speed.

Hardy RWS OA-4.8

According to the case design, we can already say that the screwdriver is designed for extreme operating conditions. The impact-resistant housing and rechargeable battery make it possible to work even in cold weather, in an unheated garage or workshop. But the main thing is that the design of the engine, battery, clamp are made with a huge margin of safety, so that in general the screwdriver was guaranteed to be durable.

The tool easily provides rotation of the sting at a speed of 3 rpm, which is more than enough for unscrewing and tightening any screws or even small self-tapping screws. The only negative is very slow charging. It will take at least 3 hours to fully charge the battery.

Full size AEG SE 3.6 Li 413165

Huge, heavy, shaped like a small screwdriver. This cordless screwdriver is ideal for any monotonous and heavy work. The weight of the device is 2 kg, mechanics and gearbox allow you to get a large torque - up to 6.5 N * m.

True, the charge lasts only 30 minutes. work, but there is a reverse and at least two speeds of rotation.

The design is quite reliable, will ensure trouble-free operation for many years.

Pocket version Molot MBS 4548 Ni

You don't always need a tool with the size and power reserve of a good cordless screwdriver. At home, an inexpensive tool is most often required in order to remove a long, thin screw in an extremely inconvenient place. Where a hand with an ordinary screwdriver obviously will not reach.

The energy reserve is enough for a maximum of half an hour of work, but the rotation speed and torque are quite high. The tool has an LED backlight, a charge indicator and a set of replacement bits.

The best screwdriver has a hardened or alloyed steel blade, a comfortable grip with rubber inserts, well balanced in the hand. If it is difficult to choose, then it is better to buy a set, usually manufacturing companies try to take into account all the requirements for a modern tool.

Tell us about your instrument, which models would you prefer.