Heating radiator on drywall: how to hang and how to fix it - Setafi

You can install the battery on drywall, but the fasteners should be inserted into the main wall. The weight of the structure is quite large, often exceeding 7-10 kg, so it is better to make a reliable foundation. This will help instructions on how to fix the heating radiator on drywall. A step-by-step description of the process with photos and explanations can be found in the presented article.

Preparatory stage

Before you understand how to hang a battery on drywall, you need to consider the engineering requirements for the location of the radiator:

• from the window sill to the battery must be at least 6 cm;
• minimum height from the floor surface - 10 cm;
• distance from the wall - at least 2 cm.

The battery must be open on all sides, i.e. do not adhere closely to any of the surfaces. This requirement ensures the safety and efficiency of heating.

At the preliminary stage, it is also necessary to prepare tools and fixtures:

• drill;
• hammer;
• construction level;
• screwdrivers;
• roulette construction;
• a drill with a length of at least 10 cm;
• putty knife;
• radiator brackets.

Step by step installation instructions

The installation process itself is not very complicated. You can understand how to attach heating radiators to drywall using the example of a bimetallic battery with 5 sections. Its weight is 7-10 kg. Fastening is carried out using brackets that are mounted in the main wall. The sequence of actions is as follows:

1. They draw up a drawing and markup according to it with the designation of the points where the fasteners will be installed. To measure distances, use a tape measure and transfer marks to a sheet of drywall. To improve accuracy, it is recommended to use the building level.
2. If the wall is concrete, then dowels of the appropriate diameter are used to install the bracket. During the work, you will need special drills from Pobedit. If the base is wooden, the dowel is not needed - the bracket is installed using a drill for working on wood or metal.
3. Take a drill and put the drill exactly at the intended point. Drill at low speed to the surface of the wall. Then they work at full speed with moderate pressure on the drill. As a result, the depth of the hole should be slightly greater than the length of the dowel (+2 cm).
4. The next step in the instructions on how to fix the battery to drywall is to install the dowel. It is put on a drill, placed in the resulting hole and inserted into the wall until it stops. In this case, the pressure on the drill should be moderate, otherwise the dowel will twist with a drill.
5. Insert the bracket into the holes and slowly screw it in, moving clockwise. In the process, you need to adjust the length of the fastener, preventing it from going too deep.
6. Do the same with the second bracket. This is the final step of the instructions on how to hang a radiator on drywall. Now you can install the radiator.
7. Hang the battery and check the parallelism of the floor using the building level.

Now it’s clear how to hang a heating battery on drywall. Batteries of low weight, for example, from 2-3 sections, can be installed in the material itself, and not in the main wall. But in order not to risk it, it is better to drill holes and insert dowels, and then brackets. This is the most reliable installation method.