When and why do you need to replace the cuff of the hatch of the LG washing machine? We repair the cuff ourselves - Setafi

click fraud protection

A cuff is a dense rubber insert that is located between the door and the drum. It prevents water from escaping, so that the tank space remains airtight after closing the door. Over time, this part wears out, so if there is damage, the cuff of the hatch of the washing machine will need to be replaced. How to do this is described in detail in the article.

The content of the article

  • When is a replacement required?
  • Preparatory work
  • Step-by-step instruction
  • Basic Prevention Measures

When is a replacement required?

The cuff is made of fairly dense materials, but it gradually wears out. Along with objective reasons, there are other factors:

  • abundant use of different powders;
  • friction of buttons, locks and other hard objects, especially metal;
  • growth of the fungus (often this happens in rooms with high humidity);
  • careless loading of the drum or inaccurate removal of things.

Determining the need for replacement is easy. It is required in cases where the surface is covered with a black coating, as in the photo, or is simply damaged (there are scratches, cracks and other defects).

instagram viewer
Replacing the cuff of the hatch of the LG washing machine

Preparatory work

In order to successfully replace the cuff of the hatch of the LG washing machine, you first need to do a little preparation. First of all, they acquire a new gum, which should be exactly the same. Also at the preparatory stage, they act like this:

  1. Disconnect the unit from the network.
  2. Close the water supply tap.
  3. Remove the drain and supply hoses.
  4. If necessary, move the machine to a place where it is more convenient to work.
  5. Replacing the cuff on an LG washing machine is quite simple. Before starting work, it is also advisable to twist the cord so that it does not interfere.

From the tools, it is enough to take a Phillips and flat screwdriver, pliers, as well as a flashlight. You can also take a screwdriver to facilitate the removal and installation of bolts. Now you can proceed to how to remove the cuff on the LG washing machine.

Step-by-step instruction

It's easy to figure out how to remove the seal on an LG washing machine. But you need to work carefully, because you have to remove the cover and several panels. The step by step instructions are:

  1. Remove the top cover and front panel.How to remove the seal on the LG washing machine - 1
  2. Remove the panel from below by pulling it up with a screwdriver.how to remove the seal on the LG washing machine - 2
  3. Find the spring on the bottom - it is she who holds the seal. Now it will become more clear how to replace the cuff on an LG washing machine.how to remove the seal on the LG washing machine - 3
  4. Pry off the ring with a flathead screwdriver and remove it.how to remove the seal on the LG washing machine - 4
  5. Unscrew 5 screws and remove the front panel. To do this, it is shifted a little up and removed. Thanks to this, replacing the gum on the LG washing machine will be quick.how to remove the seal on the LG washing machine - 5
  6. Remove all weights by unscrewing the bolts.how to remove the seal on the LG washing machine - 6
  7. Find the spring on top, pry it off with a screwdriver, and insert pliers into the adjacent loop. From this stage, the actual replacement of the sealing gum on the LG washing machine begins.how to remove the seal on the LG washing machine - 7
  8. Pull both tools towards each other so as to release the hook. It may not work the first time, but you need to try again to figure out how to change the gum on an LG washing machine.how to remove the seal on the LG washing machine - 8
  9. After removing the old part, the picture looks something like this. It remains to understand how to put on the cuff on the washing machine, that is, to mount a new part.how to remove the seal on the LG washing machine - 9
  10.  The gum has persistent contamination in a fairly large amount. Below is a photo of the cuff after continuous operation for 10 years.how to remove the seal on the LG washing machine - 10
  11.  Replacing the hatch handle of the LG washing machine and installing a new seal begins by looking for the triangle icon on top. It is combined with a similar recess on the cuff.how to remove the seal on the LG washing machine - 11
  12.  Next, the seal is completely replaced in the LG washing machine - the new part is manually pressed around the entire circumference.how to remove the seal on the LG washing machine - 12
  13.  Insert into ring 3 or 4 and tighten. It is clear how to remove the rubber cuff on the washing machine - after installing a new part, you need to assemble all the elements in the reverse order.how to remove the seal on the LG washing machine - 13
  14.  At the last stage, the front panel is reinstalled. If everything is done correctly, the new seal will last long enough. Therefore, you can forget about how to remove the gum on the LG washing machine for 5-10 years.how to remove the seal on the LG washing machine - 14
  15.  Install the top cover and small front panel, do a test wash.how to remove the seal on the LG washing machine - 15

Basic Prevention Measures

Now it’s clear how to replace the gum on the LG washing machine. This is not a very complicated, but rather time-consuming procedure that requires accuracy. To face such a problem as rarely as possible, it is recommended to follow the basic preventive measures:

  1. Wash bras using special bags. In them, it is better to wash socks, as well as objects with metal elements.
  2. You should not wash shoes in the machine, although special bags can also be found on sale. But such items are very dirty and can cause an overload of the machine.
  3. Also, do not wash car mats - otherwise you will again have to study the instructions on how to remove the rubber band from the LG washing machine drum.
  4. For washing, only a specially designed powder is used (a product for manual use is not suitable).
  5. Before each closing of the lid, check that the drum door is tight - this recommendation only applies to upright washing machines.
  6. It is strictly forbidden to connect the unit to hot water, because it greatly clogs not only the cuff, but also other parts (heating element, drum).
  7. Another risk factor is hard water. If it has too many magnesium and calcium bicarbonate salts, a special filter should be installed.

You can replace the cuff with your own hands, without resorting to the help of a specialist. To do this, you will need improvised means - a screwdriver, pliers, you can also use a screwdriver. In extreme cases, it is allowed to call the master. This is justified if the car is under warranty.

A hole in the drywall on the wall: how and with what to seal the hole – Setafi

A hole in the drywall on the wall: how and with what to seal the hole – SetafiRepairHome

Walls finished with plasterboard look neat and modern, but sometimes holes may appear on their surface from impacts, perforations, or other damage. In such cases, the question arises of how to repa...

Read More
Choosing a reciprocating saw, what to rely on when choosing

Choosing a reciprocating saw, what to rely on when choosingHomeSawReciprocating Saw

Every owner has a set of tools in their home. Reciprocating saw enters it. This is a functional, mobile device. It is used to cut boards, reinforcement, bricks, remove branches and beams, and also ...

Read More
How to connect a watering hose to a pipe: polypropylene, metal

How to connect a watering hose to a pipe: polypropylene, metalHomeGarden ToolsHose

Many garden areas require a high-quality watering system. Some use hoses connected to the central water supply for this. In order for the watering process to be effective, it is necessary to correc...

Read More
Instagram story viewer