Indesit washing machine malfunctions: do-it-yourself repair according to the instructions with a photo - Setafi

It is quite possible to repair many malfunctions of the Indesit washing machine with your own hands, without calling a specialist. For example, using ordinary screwdrivers, you can inspect the heating element or clean the drain pump. At the same time, there are more serious problems that require inspection by the master. How to repair the unit yourself is described in this material.

Heating element breakage

One of the most common malfunctions is the failure of the heating element. As a result, the water practically does not heat up, which can be felt by putting your hand to the glass of the door. Also, users sometimes note the smell of burning, which indicates the final breakdown of the part and the need for its urgent replacement.

It is not difficult to carry out restoration work - in such a situation, it is possible to repair the Indesit washing machine with your own hands. But it should be borne in mind that the part is located under the cover at the back, so the device must first be de-energized and deployed. Next, they act like this:

1. Unscrew each bolt (6 in total) to remove the back panel.
2. Then, under the tank, the contacts of the heating element are found. It is to them that you need to attach the probes coming from the multimeter to check the voltage. Normally, it should be from 25 to 35 ohms. Otherwise, there is a fact of malfunction of the Indesit washing machine - the heating element needs to be replaced.
3. Further, it is recommended to take a picture of the heating element with the wires, so as not to confuse the order of their connection later.
4. If the Indesit washing machine breaks down and the water does not heat up, you need to inspect the heating element. To do this, disconnect all wires with terminals.
5. After that, unscrew the central nut (1), but not completely. If the bolt does not go into the hole, you need to take a small hammer and lightly knock on it.
6. Loosening the ten, pull it towards you. In this case, it is very convenient to use a regular screwdriver.
7. If the heating element does not work, you will need to repair the Indesit washing machine with your own hands. In this case, the old heating element is removed, and the new one is inserted and then the wires are connected.
8. Next, fix the new spare part with a bolt, tighten the nut and put the back panel in place.
9. After the repair of the Indesit washing machine is over, you need to check how it heats the water by touching the door with your palm.

Drain problems

Users sometimes encounter breakdowns of the Indesit washing machine and are looking for ways to fix them. Moreover, one of the most common problems is associated with the drain system. The most vulnerable element is the pump, which pumps out the waste water.

If extraneous sounds are heard during draining, the liquid leaves too slowly or does not drain at all, the impeller must have broken or the filter mesh or the hose itself is very clogged. These elements must be removed and cleaned by rinsing under running water, using detergents if necessary.

But if such measures did not help, a more complex repair of malfunctions of the Indesit washing machine, associated with the inspection and replacement of the pump, may be necessary. The sequence of actions is as follows:

1. First, the machine is de-energized, because if you just press the shutdown button, it is dangerous to carry out repair work.
2. Next, clothes are removed from the drum, if necessary, water is drained, substituting a basin.
3. Find the mounting bolts on the front panel and unscrew them.
4. They find the pump under the drums and take out the snail, carefully unscrewing the bolts. At this stage, repairing the Indesit washing machine with your own hands must be done carefully, since the parts are rather fragile.
5. Remove the tube, wires and terminals. Moreover, before the start of dismantling, they are photographed in order to properly assemble them later.
6. Install a new element and all other spare parts. Assembly is carried out in the opposite sequence
7. As you can see, in the described situation, it is quite possible to repair Indesit washing machines on your own. Checking the motor’s performance is also simple - after installation, the plug is reconnected to the outlet and the quick wash program is started. If the water drains normally, then the problem is solved.

Motor failure

If the motor breaks down, this is already a serious malfunction, the elimination of which is quite expensive. In such cases, it is first necessary to correctly diagnose. You can determine the breakdown of the motor by the following signs:

• the drum does not rotate well (especially if a lot of clothes are loaded);
• a burning smell appears;
• the machine can shock (this is unpleasant, but not dangerous);
• case gets hot and may generate sparks.

Similar signs of malfunction are also observed in Indesit top-loading washing machines. To fix the problem, the device is disconnected from the network and act as follows:

1. Unscrew the fasteners and remove all panels, including the top cover.
2. Photograph the wire contacts and disconnect them.
3. If there is a drive belt, it is removed from the pulley groove.
4. Next, remove the fastenings of the motor itself and take it out.

After that, you need to understand how to repair the Indesit washing machine. As a rule, it is problematic to restore the engine, so it is easier to purchase a new one. It is installed in exactly the same way, but moves in the reverse order. If in doubt, it is better to entrust the diagnosis to the master.

Thus, repairing washing machines at home is quite real, but only on condition that the breakdown is not too serious, and the user has the appropriate experience. To prevent failures, it is necessary to ensure the correct installation of the Indesit washing machine with your own hands and follow the basic rules of operation.

You should also always follow the error codes that appear on the display (or in the form of flashing indicators). They indicate malfunctions of the Indesit top-loading washing machine or a conventional front-loading model. Moreover, if you are not sure where exactly the breakdown occurred, it is better to involve a specialist who can both establish the exact cause and perform the appropriate repairs.