What characterizes the F4 error in the Atlant washing machine? Causes and consequences of occurrence, elimination - Setafi

If the F4 error in the Atlant washing machine appears once, the reasons are most likely related to a blockage in the drain pipe or filter. In such cases, the repair is carried out independently. However, there may be more serious reasons that can only be determined by professional means. These and other factors are discussed in the article.

Main reasons

If an F4 error appears in the Atlant washing machine, the easiest reason is a problem with the drain system. Most likely, the pump or pump is broken. Then, along with the code "F4", indicator No. 2 will appear. This suggests that the waste water does not exit the tank through the hose into the sewer pipe.

It also happens that the model is not equipped with a display. Then no inscription will appear, but it is still realistic to determine a violation of the drain system. The second indicator should light up and at the same time the light next to the off button.

If Atlant gives an F4 error, and indicator No. 2 is off, the reasons will be different:

1. The device is broken, professional diagnostics and repair is required.
2. Clutch not working.
3. The drain hose is clogged or damaged, preventing water from flowing out normally.
4. The electronic circuit has broken - there is no short circuit in it.
5. Contact violations.
6. The ball fired.

Is self-repair possible?

Elimination of breakdowns at home is possible only in some cases. If the Atlant washing machine shows the F4 error, it is recommended to proceed as follows:

1. Turn off the socket and wait 5-7 minutes, then plug it back into the socket. Next, you need to look at the screen to see if the code lights up again. If the inscription no longer appears, it means that it lit up by mistake, which also sometimes happens.
2. If the filter has not been cleaned or replaced for a long time, you need to turn off the machine and remove it. To do this, first pour the water into the basin and take out the filter, clean it, put it in place and start the unit again. If the Atlant machine no longer has an F4 error, then this was the reason.
3. Often problems are associated with the drain hose - it becomes clogged or damaged due to wear. To fix the problem, you need to drain the waste fluid, remove the hose and rinse it under strong pressure of hot water. Then the parts are put in place and check how the device works.
4. If the F4 error of the Atlant washing machine in the siphon is associated with a clogged sewer or deposits, you must also turn off the device, remove the hose and clean the clogged nodes.

When to Contact a Specialist

If all the described methods do not help, you should contact the wizard. The most difficult problems that you can hardly solve on your own include:

1. Breakage of the drain pump (linen is not rinsed, water is drained with difficulty). A replacement part will be required.
2. If the F4 error in the Atlant refrigerator or in the washing machine appears for no reason, several times during the wash, this clearly indicates a failure in the electronics. Most likely, it is necessary to replace the electronic board, processor or other elements. Such a repair will cost a lot.
3. It also happens that the water sensor breaks down, which controls its presence in the tank and, if necessary, prevents the spinning process from starting. It will not be possible to repair it - the part will just need to be replaced.
4. If the message "F4" lights up before draining, this indicates a malfunction of another sensor that controls the fullness. Then the part must also be removed and replaced with a new one.

Thus, the F4 error can appear for completely different reasons. Some are quite harmless - for example, it is enough to clean the filter, siphon or hose. But if the inscription lights up often, this indicates a breakdown of the electronics. Such a malfunction has more serious causes, so you need to call the wizard or contact the service center.